Final | 7/11/2018 | 7/12/2018 | 7/12/2018 | A | PASS |
Rock A. Hudson
|
|
|
We are requesting another final on this project. the corrections have been made. Thank you! Our contact is Larry ###-#### Phone #: ###-#### Inspection requested via web by Larry Looney Final ok
|
Final | 7/11/2018 | 7/11/2018 | 7/11/2018 | P | FAIL |
Rock A. Hudson
|
|
|
Idaho Power is scheduled to connect power to the pedestal today. we are requesting a final inspection for this project. Our contact is Larry, ###-####. Thank you! Phone #: ###-#### Inspection requested via web by Larry Looney 408.4- Circuit directory shall be complete and accurate. 1 20 amp breaker buried behind knock out and feeds photo cell.
|
Permanent Service | 6/13/2018 | 6/13/2018 | 6/13/2018 | P | PASS |
Rock A. Hudson
|
|
|
We are requesting a Permanent Service inspection for this project. Our contact is Larry, ###-####. Thank you! Phone #: ###-#### Inspection requested via web by Larry Looney p/s u/g n ok
|
Final | 6/12/2018 | 6/13/2018 | 6/13/2018 | A | FAIL |
Rock A. Hudson
|
|
|
We are requesting a final inspection for this project. Our contact is Larry ###-#### Phone #: ###-#### Inspection requested via web by Larry Looney 250.8(A)(6)- Thread forming machine screws that engage not less than 2 threads in the enclosure shall be used. Permanent service inspection must be approved prior to final inspection. At final shall be labelled and circuit free of shorts.
|
Electrical Rough-In | 6/7/2018 | 6/8/2018 | 6/8/2018 | P | PASS |
Rock A. Hudson
|
|
|
We are requesting an underground rough-in inspection for this project. Our contact is Larry, ###-#### Phone #: ###-#### Inspection requested via web by Larry Looney Underground and pole bases rough in ok cover
|
Conference | 6/7/2018 | 6/7/2018 | 6/7/2018 | P | DONE |
Rock A. Hudson
|
|
|
Larry requested a consult to clarify location of power pedestal. Phone #: ###-#### Inspection requested via web by Clint Tate Discussed any requirements for pedistal for parking lot. Minimum work clearances and grounding cover by NEC. No additional ballards needed.
|