DOC - Permit Finaled | 11/4/2019 | 11/4/2019 | 11/4/2019 | P | PASS |
Ben Livingston
|
|
|
|
Final | 11/3/2019 | 11/4/2019 | 11/4/2019 | P | FAIL |
Ben Livingston
|
|
|
Inspection requested via web by Don Dowers - need locking caps on condencer -
|
Rough-in | 6/20/2019 | 6/21/2019 | 6/21/2019 | A | PASS |
Ben Livingston
|
|
|
this is for wood burning fireplace rough in only. Inspection requested via web by Don Dowers
|
Pressure Test | 5/29/2019 | 5/30/2019 | 5/30/2019 | A | PASS |
Eric Strole
|
|
|
Inspection requested via web by Don Dowers
|
Pressure Test | 5/29/2019 | 5/29/2019 | 5/29/2019 | P | FAIL |
Eric Strole
|
|
|
20 lb gas test pass. Cannot strap gas-tite in vertical walls.
|
Rough-in | 5/28/2019 | 5/29/2019 | 5/29/2019 | P | PASS |
Eric Strole
|
|
|
Inspection requested via web by Don Dowers
|
Rough-in | 5/27/2019 | 5/28/2019 | 5/28/2019 | P | FAIL |
Ben Livingston
|
|
|
Inspection requested via web by Don Dowers manual J calls for 6" fresh air not 4" 5lb flue okay
|
Pressure Test | 5/28/2019 | 5/28/2019 | 5/28/2019 | P | FAIL |
Ben Livingston
|
|
|
Inspection requested via web by Don Dowers flash shield fittings not installed per manufacturers instalation instructions, need to use factory approved stricker plates, cannot attach gas flex inside of a wall, need to repressure test again
|
Rough-in | 5/24/2019 | 5/28/2019 | 5/27/2019 | A | CANC |
Ben Livingston
|
|
|
>> Inspection requested via web by Don Dowers Inspection cancelled from web by: Don Dowers
|