BLD01-01667
| BLD-Other | 1/23/2002 | 1/24/2002 | 1/24/2002 12:00:00 AM | A | CANC |
|
|
Scheduled by a contractor via Hello! on 01/23/2002 at 17:44:28. Contact: ###-####. Cancelled by contractor 1/24/2002 10:12:12 AM
|
MEC02-00128
| Final | 1/23/2002 | 1/24/2002 | 1/24/2002 12:00:00 AM | A | PASS |
|
|
Scheduled by a contractor via Hello! on 01/23/2002 at 12:02:43. Contact: ###-####. New hot water heater not furnace--vent, fex line and shut off ok-- 1/24/2002 9:18:47 AM
|
BLD02-00108
| BLD-Footing | 1/23/2002 | 1/24/2002 | 1/24/2002 12:00:00 AM | A | PART |
|
|
no approved plans on site--no contact number--appears ok--pour at own risk. 1/24/2002 8:56:43 AM
|
BLD01-02512
| BLD-Final | 1/23/2002 | 1/24/2002 | 1/24/2002 12:00:00 AM | P | FAIL |
|
|
Scheduled by a contractor via Hello! on 01/23/2002 at 17:43:06. Contact: ###-####. Correction notice issue--penetration at 1-hr wall, air seal behind elec. plates on outside walls, full visqueen coverage required in crawl. 1/24/2002 1:44:29 PM
|
BLD01-02468
| BLD-Foundation | 1/23/2002 | 1/24/2002 | 1/24/2002 12:00:00 AM | P | PART |
|
|
Scheduled by a contractor via Hello! on 01/23/2002 at 21:19:47. Contact: ###-####. wip--85% completed 1/24/2002 1:02:08 PM
|
BLD02-00046
| BLD-Footing | 1/24/2002 | 1/24/2002 | 1/24/2002 12:00:00 AM | P | PART |
|
|
###-#### JED wip--95% ready 1/24/2002 3:34:15 PM
|
BLD01-03011
| BLD-Framing/Rough-in | 1/24/2002 | 1/24/2002 | 1/24/2002 12:00:00 AM | P | PART |
|
|
Scheduled by a contractor via Hello! on 01/24/2002 at 09:10:01. Contact: ###-####. C/n posted on site--ok to insulate 1/24/2002 2:53:21 PM
|
BLD01-02375
| BLD-Framing/Rough-in | 1/24/2002 | 1/24/2002 | 1/24/2002 12:00:00 AM | P | CANC |
|
|
shear nail ###-#### Cancelled by contractor via telephone. 1/24/2002 12:31:50 PM
|
BLD01-01667
| BLD-Other | 1/24/2002 | 1/24/2002 | 1/24/2002 12:00:00 AM | P | FAIL |
|
|
Scheduled by Inspector: 420 On 1/24/2002 10:10:40 AM Building #3--1-Hr. fire wall--some nailing is light--not per approved plans--misc. areas need fire caulding where penetrations are 1/8" or wider. 1/24/2002 1:42:56 PM
|