Inspections for the day of: Friday, January 24, 2020.
Number of inspections: 12
Percentage of inspections complete: 100 %
Percentage of inspections not complete: 0 %
Contact Information
InspectorDan Ediger
TitlePLM-INSPECTOR
Phone #869-5166
Permit NumberDescriptionReceivedRequestedCompletedAM/PMDisposition 
PLM19-05432 Final1/24/20201/24/20201/24/2020 4:03:07 PMPPASS
PLM19-04809 Groundwork1/24/20201/24/20201/24/2020 4:02:04 PMPPASS
please call cody prior to arrival for access Phone #: ###-#### Inspection requested via web by Nicholas Paige
PLM20-00221 Plumbing Rough-in1/23/20201/24/20201/24/2020 4:01:47 PMPPASS
David Phone #: ###-#### r-in inside the house
PLM19-05432 Final1/24/20201/24/20201/24/2020 3:16:13 PMPNH
Call me for access, please. Phone #: ###-#### Inspection requested via web by Troy Pherigo
PLM20-00241 Final1/23/20201/24/20201/24/2020 12:18:59 PMAPASS
Phone #: ###-#### Inspection requested via web by DANIELLE BROOKSHIRE
PLM20-00241 Water and/or Sewer1/23/20201/24/20201/24/2020 12:18:44 PMAPASS
Kathy Phone #: ###-####
PLM20-00241 DOC - Permit Finaled1/24/20201/24/20201/24/2020 12:18:32 PMPPASS
vidio good
PLM19-04987 Final1/23/20201/24/20201/24/2020 11:04:54 AMAFAIL
Phone #: ###-#### Inspection requested via web by Tobi Wilson
1. Water heater condensate cannot termimate outside due to freezing.
2, T&P must terminate no less than 6" above grade.
3. Install a 90 on the t&p termination.
PLM20-00302 Water and/or Sewer1/24/20201/24/20201/24/2020 10:12:22 AMAPASS
Phone #: ###-#### Inspection requested via web by phil duman
PLM20-00302 DOC - Permit Finaled1/24/20201/24/20201/24/2020 10:12:03 AMPPASS
PLM20-00274 Water Heater Final1/23/20201/24/20201/24/2020 9:56:24 AMAPASS
Please call Jeremy on your way - ###-#### Phone #: ###-#### Inspection requested via web by Arielle Hendricks
PLM20-00288 Water Heater Final1/22/20201/24/20201/24/2020 9:28:31 AMAFAIL
Please call Morgan when on the way over. Phone #: ###-#### Inspection requested via web by Aaron Alandt
1. Flue needs to grade 1/4" per foot to the tee wye.
2. Drill an 1/8" hole at the lowest point of the t&p drain.
3. Install CO detectors.
4. Check the flue height on the roof.
5. Turn off the drain valve. It's in the on position.