Corrections made as Pat requested on service.
Thank you have a good weekend Phone #: ###-#### Internet Inspection Request from:
Paul Schepper
P/S U/G N Ok

Contact: Bob Schroder Phone #: ###-#### Internet Inspection Request from: Julie Schroder
P/S U/G N Ok

Contact: Bob Schroder Phone #: ###-#### Internet Inspection Request from: Julie Schroder
R/I Ok

facility is locked please call Dean 30-40 minutes before coming to inspect @###-#### or Mike @###-#### Internet Inspection Request from: Mike TenHulzen

please call me 1 hour before you get there so that I can make sure you can get in the home. Thanks, Robert Phone #: ###-#### Internet Inspection Request from: Robert Murray Inspection cancelled from web by: Robert Murray

renea Phone #: ###-####
walls in area 3 ANOP

KARA - please call 1/2 hr prior to inspection Phone #: ###-####
430.14 Location of Motors.
(A) Ventilation and Maintenance. Motors shall be located so that adequate ventilation is provided and so that maintenance, such as lubrication of bearings and replacing of brushes, can be readily accomplished.
210.12 Arc-Fault Circuit-Interrupter Protection.
(B) Dwelling Unit Bedrooms. All branch circuits that supply 125-volt, single-phase, 15- and 20-ampere outlets installed in dwelling unit bedrooms shall be protected by an arc-fault circuit interrupter
410.8 Luminaires (Fixtures) in Clothes Closets.
(C) Luminaire (Fixture) Types Not Permitted. Incandescent luminaires (fixtures) with open or partially enclosed lamps and pendant luminaires (fixtures) or lampholders shall not be permitted.

314.25 Covers and Canopies.
In completed installations, each box shall have a cover, faceplate, lampholder, or luminaire (fixture) canopy, except where the installation complies with 410.14(B).
408.4 Circuit Directory or Circuit Identification
Every circuit and circuit modification shall be legibly identified as to its clear, evident, and specific purpose or use. The identification shall include sufficient detail to allow each circuit to be distinguished from all others. The identification shall be included in a circuit directory that is located on the face or inside of the panel door in the case of a panelboard, and located at each switch on a switchboard.

422.31 Disconnection of Permanently Connected Appliances.
(B) Appliances Rated Over 300 Volt-Amperes or 1/8 Horsepower.
406.3 General Installation Requirements.
Receptacle outlets shall be located in branch circuits in accordance with Part III of Article 210. General installation requirements shall be in accordance with 406.3(A) through (F).
(B) To Be Grounded. Receptacles and cord connectors that have grounding contacts shall have those contacts effectively grounded.
410.4 Luminaires (Fixtures) in Specific Locations.
(A) Wet and Damp Locations. Luminaires (fixtures) installed in wet or damp locations shall be installed so that water cannot enter or accumulate in wiring compartments, lampholders, or other electrical parts. All luminaires (fixtures) installed in wet locations shall be marked, “Suitable for Wet Locations.” All luminaires (fixtures) installed in damp locations shall be marked, “Suitable for Wet Locations” or “Suitable for Damp Locations.”

Garage code 23230. Phone #: ###-#### Internet Inspection Request from: Kathy Briggs