11/13/2003 10:00:19 AM

George; Phone #: ###-#### Internet Inspection Request from: Aimee Hughes

Contact Matt Kelly; Phone #: ###-#### Internet Inspection Request from: Deb McCoy

###-####. Scheduled by a contractor via Hello! on 11/10/2003 at 7:25:45 AM. Contact: ###-####. 11/10/2003 11:32:39 AM

per home owner already done?? ###-#### home kelly or cell ###-####
250.24 Grounding Service-Supplied Alternating-Current Systems.
(A) System Grounding Connections.
(1) General. The connection shall be made at any accessible point from the load end of the service drop or service lateral to and including the terminal or bus to which the grounded service conductor is connected at the service disconnecting means.
200.6Means of Identifying Grounded Conductors.

110.3 Examination, Identification, Installation, and Use of Equipment.
(B) Installation and Use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.
250.28 Main Bonding Jumper.
For a grounded system, an unspliced main bonding jumper shall be used to connect the equipment grounding conductor(s) and the service-disconnect enclosure to the grounded conductor of the system within the enclosure for each service disconnect.
250.8 Connection of Grounding and Bonding Equipment.
Grounding conductors and bonding jumpers shall be connected by exothermic welding, listed pressure connectors, listed clamps, or other listed means. Connection devices or fittings that depend solely on solder shall not be used. Sheet metal screws shall not be used to connect grounding conductors to enclosures.
110.12 Mechanical Execution of Work.
Electrical equipment shall be installed in a neat and workmanlike manner.
(A) Unused Openings. Unused cable or raceway openings in boxes, raceways, auxiliary gutters, cabinets, cutout boxes, meter socket enclosures, equipment cases, or housings shall be effectively closed
250.104 Bonding of Piping Systems and Exposed Structural Steel.
(A) Metal Water Piping. The metal water piping system shall be bonded as required in (1), (2), (3), or (4) of this section.

250.64 Grounding Electrode Conductor Installation.
Grounding electrode conductors shall be installed as specified in 250.64(A) through (F).
(B) Securing and Protection from Physical Damage.
11/10/2003 2:10:37 PM

gary; Phone #: ###-#### Internet Inspection Request from: Annette Moore