Inspections for the day of: Friday, November 5, 2010.
Number of inspections: 14
Percentage of inspections complete: 100 %
Percentage of inspections not complete: 0 %
Contact Information
InspectorClint A Smith
TitleEROSION CONTROL INSPECTOR
Phone #794-8996
Permit NumberDescriptionReceivedRequestedCompletedAM/PMDisposition 
ESC05-00504 Aging Inspection11/5/201011/5/201011/7/2010 2:10:46 PM CANC
MIS10-00313 ESC-Conference11/4/201011/5/201011/5/2010 3:29:50 PMPPART
All measure that were asked to be installed have been installed.
ESC10-00826 Site Preparation11/3/201011/5/201011/5/2010 3:29:02 PMANR
Spoke with landscapers on how to install the sediment barriers properly.
ESC10-00809 Site Preparation11/4/201011/5/201011/5/2010 3:28:13 PMANR
ESC05-00503 Aging Inspection11/5/201011/5/201011/5/2010 1:25:21 PM DONE
ESC05-00503 DOC - Permit Finaled11/5/201011/5/201011/5/2010 1:25:14 PMPPASS
ESC07-01514 Aging Inspection11/5/201011/5/201011/5/2010 1:24:51 PM DONE
ESC07-01514 DOC - Permit Finaled11/5/201011/5/201011/5/2010 1:24:44 PMPPASS
ESC07-01515 Aging Inspection11/5/201011/5/201011/5/2010 1:24:26 PM DONE
ESC07-01515 DOC - Permit Finaled11/5/201011/5/201011/5/2010 1:24:16 PMPPASS
ESC10-00831 Site Preparation11/5/201011/5/201011/5/2010 1:17:14 PM NR
ESC10-00657 Conference11/5/201011/5/201011/5/2010 12:47:51 PMPDONE
Showed areas the the acting Super of the project (not the RP) of the areas where track walking need to occur and where they should consider placing in sediment barriers and energy disapators. Will follow-up on 11/8/2010 AM.
ESC10-00010 Tracking Control11/1/201011/5/201011/5/2010 12:41:50 PMAPASS
ESC10-00675 BMP Violation11/5/201011/5/201011/5/2010 9:15:43 AMAFAIL
**FINAL NOTICE**
1. Clean up all concrete residual that is not in a containment.
2. Provide a stabilized construction exit onto the disturbed area where spoil piles are being placed.
3. Provide a concrete washout for all further concrete work or for all non storm water pollutant clean out.
4. Re-install the sediment barrier at the east end of the project area per industry standards.
Failure to comply will result in a STOP WORK ORDER. Will re-inspect on 11/8/10 AM.