Inspections for the day of: Monday, December 8, 2014.
Number of inspections: 9
Percentage of inspections complete: 100 %
Percentage of inspections not complete: 0 %
Contact Information
InspectorCevyn Recla
TitleELE-INSPECTOR
Phone #985-3493
Permit NumberDescriptionReceivedRequestedCompletedAM/PMDisposition 
ELE12-03065 Final12/5/201412/8/201412/8/2014 2:18:30 PMPPASS
Contact: Casey Fouts with any questions Phone #: ###-#### Inspection requested via web by Deb Gooden
walked through with Casey for repairs made, Final OK
ELE14-03372 Electrical Rough-In12/8/201412/8/201412/8/2014 1:19:25 PMPPASS
Mike-please call prior for access Phone #: ###-####
RI ok to cover
ELE14-03357 Final12/5/201412/8/201412/8/2014 12:59:16 PMPPASS
16 solar panels.
AC micro-inverter system. No DC voltage.
M250 Enphase Micro-Inverters, CSA, IEEE-1547, and UL-1741 listed
and 270 watt Suniva panels, ETL listed
A single home run, in conduit, is ran from solar array to the knife switch, located next to meter base on west side of home in back yard. From the knife switch to breaker in main panel, at the bottom of the busing, opposite the feeder lugs. The solar breaker and the knife switch are clearly marked for solar, and the circuit number identified in the knife switch.
The inverters, panels and rails are all bonded with a number 6 ground that runs back to the service electrode under the main panel.

The main panel is in the back yard, so give the homeowner a call at 949.6005 for access. If homeowner is not able to be home, call me and I can meet you there.

Thanks guys Phone #: ###-#### Inspection requested via web by Ryan King
left message for contractor
FInal OK
ELE14-01767 Final12/5/201412/8/201412/8/2014 12:47:39 PMPPASS
I will be ready right after lunch. Phone #: ###-#### Inspection requested via web by Mike Cole
FInal OK
ELE14-03331 Final12/5/201412/8/201412/8/2014 9:15:18 AMAFAIL
The grounding has been updated, any questions please let me know, Thx Cevyn.
The Access code is 3902 Phone #: ###-#### Inspection requested via web by Stephen Kren
Panel cover must be installed and breakers legibly identified for their purpose for final inspection
ELE14-03331 Permanent Service12/8/201412/8/201412/8/2014 9:14:40 AMPPASS
The grounding has been updated, any questions please let me know, Thx Cevyn.
The Access code is 3902 Phone #: ###-#### Inspection requested via web by Stephen Kren
PS, OH, RC, OK
ELE14-02734 Final12/5/201412/8/201412/8/2014 8:48:12 AMAPASS
Garage code JAYO enter Phone #: ###-#### Inspection requested via web by Zane Robertson
Final OK
ELE14-02782 Electrical Rough-In12/5/201412/8/201412/8/2014 8:47:26 AMAPASS
Floor heat inspection master bath the garage code is JAYO enter Phone #: ###-#### Inspection requested via web by Zane Robertson
Ok to cover
ELE14-03084 Final12/5/201412/8/201412/5/2014 4:57:14 PMPCANC
Right after lunch would be great and I will be there.

Thanks

Mike Phone #: ###-#### >> Inspection requested via web by Mike Cole Inspection cancelled from web by: Mike Cole