MEC07-00536
| Rough-in | 2/23/2007 | 2/23/2007 | 2/26/2007 8:14:33 AM | P | NR |
|
|
Phone #: ###-#### x4254
|
MEC05-00618
| Final | 2/22/2007 | 2/23/2007 | 2/23/2007 3:48:35 PM | P | NH |
|
|
Please inspect after 2:00p.m. Call Brad on the way, ###-####. Work was done in February of 2005. Phone #: ###-####
|
MEC07-00606
| Rough-in | 2/23/2007 | 2/23/2007 | 2/23/2007 3:17:25 PM | P | NH |
|
|
key doesn't open door
|
MEC07-00630
| Final | 2/23/2007 | 2/23/2007 | 2/23/2007 2:26:37 PM | P | PASS |
|
|
nat - please call 1/2 hr prior to inspection ; Phone #: ###-#### Internet Inspection Request from: Patricia Smith
|
MEC07-00627
| Rough-in | 2/23/2007 | 2/23/2007 | 2/23/2007 1:51:04 PM | P | PASS |
|
|
|
MEC07-00606
| Pressure Test | 2/22/2007 | 2/23/2007 | 2/23/2007 1:37:09 PM | P | DONE |
|
|
dave; Phone #: ###-#### Internet Inspection Request from: Victoria Beall..gas was already done on shell and core
|
MEC07-00606
| Rough-in | 2/22/2007 | 2/23/2007 | 2/23/2007 1:35:32 PM | P | NR |
|
|
dave; Phone #: ###-#### Internet Inspection Request from: Victoria Beall....talked with lonnie..need 10' from r/a to fire-box
|
MEC07-00522
| Rough-in | 2/23/2007 | 2/23/2007 | 2/23/2007 11:42:20 AM | A | PEND |
|
|
Scheduled by a contractor via Hello! on 2/23/2007 at 6:47:21 AM. Contact: ###-####....mark will reschedule this for monday along with another inspection on another permit
|
MEC07-00521
| Rough-in | 2/23/2007 | 2/23/2007 | 2/23/2007 11:34:13 AM | A | PASS |
|
|
Scheduled by a contractor via Hello! on 2/23/2007 at 6:46:46 AM. Contact: ###-####..ok to cover
|
MEC07-00579
| Final | 2/22/2007 | 2/23/2007 | 2/23/2007 11:29:19 AM | A | PASS |
|
|
Thank you Dixie!!! Phone #: ###-####
|
MEC07-00603
| Final | 2/22/2007 | 2/23/2007 | 2/23/2007 11:26:56 AM | A | PASS |
|
|
Please call Karl if you have any questions! Phone #: ###-####
|
MEC07-00088
| Rough-in | 2/22/2007 | 2/23/2007 | 2/23/2007 10:46:20 AM | A | PART |
|
|
Rough-in /Travis Phone #: ###-####..partial grease duct inspection..travis will cut in the access doors and re-call and i will check the inside welds again at each opening
|