PLM20-00387
| Pressure Test | 2/6/2020 | 2/6/2020 | 2/7/2020 8:11:33 AM | P | NH |
|
|
Pressure gauge is set at 20 psi . Gauge is in home. Homeowner will leave front door unlocked for the inspector . Phone #: ###-#### Inspection requested via web by Joseph Corcoran
|
|
PLM19-05219
| Final | 2/6/2020 | 2/6/2020 | 2/6/2020 2:36:49 PM | P | PASS |
|
|
Cottage in ally. Key to the door is on top of fence post for gate next to cottage. Phone #: ###-#### Inspection requested via web by Bill Calkins
|
|
PLM20-00129
| Plumbing Rough-in | 2/6/2020 | 2/6/2020 | 2/6/2020 2:15:04 PM | P | PART |
|
|
Phone #: ###-#### Inspection requested via web by Ray O’Brien. groundwork
|
|
PLM19-03896
| Final | 2/5/2020 | 2/6/2020 | 2/6/2020 12:03:22 PM | A | FAIL |
|
|
BRIAN IS THE JOB CONTACT ###-#### Phone #: ###-#### Inspection requested via web by BECCA DUMMER
1. Provide an approved set of plans and the Occupancy sign off sheet
2. provide the water heater manual.
3. Install an 1-1/2" air gap on the 100 gal wh t&p.
4. Support and strap the t&p drain at the floor.
5.Install hangers on the flue and air combustion air to the 100 gal water heater.
6. Exopose trap primers
7. Replace the gal. water fitting with a durham drainage fitting on the hall sink.
8. Expose the urinal cleanouts.
|
|
PLM19-04809
| Plumbing Rough-in | 2/5/2020 | 2/6/2020 | 2/6/2020 11:18:58 AM | A | CANC |
|
|
wast piping inspection please call cody prior to arrival for access
thanks
Phone #: ###-#### Inspection requested via web by Nicholas Paige
grease and waste overhead parking structure ok. addind a cleanout to the floor drain by the stairwell
|