Inspections for the day of: Tuesday, March 6, 2007.
Number of inspections: 11
Percentage of inspections complete: 100 %
Percentage of inspections not complete: 0 %
Contact Information
InspectorJim Johnson
TitlePLM-INSPECTOR
Phone #794-9476
Permit NumberDescriptionReceivedRequestedCompletedAM/PMDisposition 
PLM05-04309 Plumbing Rough-in3/6/20073/6/20073/6/2007 4:19:52 PMPPART
Scheduled by a contractor via Hello! on 3/6/2007 at 8:36:28 AM. Contact: ###-####. dwv 5th floor for room,s 57305a,09,12,13,14,and 15 test ok
PLM07-00599 Final3/6/20073/6/20073/6/2007 3:01:17 PMPPART
Vicky Please call before; Phone #: ###-#### Internet Inspection Request from: Darla Downs need to pipe t&p to an approved location
PLM07-00602 Sprinkler (Final)3/6/20073/6/20073/6/2007 2:32:00 PMPPART
Debbie; Phone #: ###-#### Internet Inspection Request from: Stacie Backus tie in ok need to have backflow tested and certified
PLM07-00143 Final3/5/20073/6/20073/6/2007 2:10:28 PMPPART
JOB CONTACT: JEFF SECHRIST ###-#### Phone #: ###-#### need to have double check ( premius protection assembly ) tested and certified need expansion tank installed
PLM06-03791 Final3/6/20073/6/20073/6/2007 1:38:56 PMPPASS
Scheduled by a contractor via Hello! on 3/6/2007 at 8:41:07 AM. Contact: ###-####.
PLM07-00592 Final3/5/20073/6/20073/6/2007 11:28:16 AMAPASS
robert ; Phone #: ###-#### Internet Inspection Request from: Patricia Smith
PLM06-00767 PLM-Aging Inspection3/6/20073/6/20073/6/2007 10:08:30 AM PASS
PLM06-00767 DOC - Permit Finaled3/6/20073/6/20073/6/2007 10:08:18 AMAPASS
PLM06-02764 PLM-Aging Inspection3/6/20073/6/20073/6/2007 10:06:13 AM PASS
PLM07-00534 Final3/5/20073/6/20073/6/2007 10:05:03 AMAPASS
Scheduled by a contractor via Hello! on 3/5/2007 at 11:39:49 AM. Contact: ###-####.
PLM07-00595 Groundwork3/5/20073/6/20073/6/2007 9:43:13 AMAPART
Rocky, 4313 side of duplex only; Phone #: ###-#### Internet Inspection Request from: Cathy Weisshaupt south side of duplex ground work test ok contractor need to verify what type of backflow needed for fire system drain in mech. room may be too small may need to increase