PLM01-04162
| Final | 4/16/2002 | 4/17/2002 | 4/17/2002 12:00:00 AM | A | FAIL |
|
|
Scheduled by a contractor via Hello! on 04/16/2002 at 10:42:55. Contact: ###-####. test dcva, turn t&p down and drill drain hole prior to offsetting vertically to exterior so water wont corrode valve. 4/17/2002 9:53:14 AM
|
PLM02-01011
| Sprinkler (Final) | 4/16/2002 | 4/17/2002 | 4/17/2002 12:00:00 AM | A | PASS |
|
|
###-#### jon
|
PLM02-01005
| Sprinkler (Final) | 4/16/2002 | 4/17/2002 | 4/17/2002 12:00:00 AM | A | PASS |
|
|
###-####
|
PLM02-01006
| Sprinkler (Final) | 4/16/2002 | 4/17/2002 | 4/17/2002 12:00:00 AM | A | PASS |
|
|
###-####
|
PLM02-01002
| Water and/or Sewer | 4/16/2002 | 4/17/2002 | 4/17/2002 12:00:00 AM | A | PASS |
|
|
Scheduled by Inspector: 330 On 4/16/2002 4:56:44 PM
|
PLM02-00875
| Final | 4/16/2002 | 4/17/2002 | 4/17/2002 12:00:00 AM | A | FAIL |
|
|
Scheduled by a contractor via Hello! on 04/16/2002 at 17:40:36. Contact: ###-####. needs an avb upstream of the control valve on the mold grinder, Bill Thompson is going to show up to make a determination on the solvent washer this afternoon and let me know what will be required. 4/17/2002 9:27:45 AM
|
PLM02-00994
| Water and/or Sewer | 4/17/2002 | 4/17/2002 | 4/17/2002 12:00:00 AM | A | PART |
|
|
Added by Inspector: 330 On 4/17/2002 11:15:10 AM 8" to main ok will wrap joints on exterior of m.h., m.h. needs grouting
|
PLM01-03729
| Water and/or Sewer | 4/17/2002 | 4/17/2002 | 4/17/2002 12:00:00 AM | A | PART |
|
|
Added by Inspector: 330 On 4/17/2002 11:22:56 AM starting the n.w. s.d. main, east side test not ready yet
|
PLM02-00982
| Sprinkler (Final) | 4/16/2002 | 4/17/2002 | 4/17/2002 12:00:00 AM | P | PASS |
|
|
STEVE ###-####
|
PLM02-01016
| Plumbing Rough-in | 4/17/2002 | 4/17/2002 | 4/17/2002 12:00:00 AM | P | PASS |
|
|
joe- ###-#### r/i
|