ESC11-00777
| Aging Inspection | 4/11/2012 | 4/11/2012 | | | |
|
|
|
|
ESC12-00180
| General Inspection | 4/11/2012 | 4/11/2012 | | | |
|
|
|
|
ESC12-00239
| Site Preparation | 4/16/2012 | 4/16/2012 | | | |
|
|
|
|
MEC12-01130
| Rough-in | 4/18/2012 | 4/18/2012 | 4/18/2012 5:08:08 PM | P | PART |
|
|
Inspect fireplace install, duct work install, gas pressure test. Ready for inspect between 1-2. Phone #: ###-#### >> Inspection requested via web by Russ Curtis....20lb gas to new f/p ok
|
|
GCM12-00067
| GCM-Final | 4/17/2012 | 4/18/2012 | 4/18/2012 5:07:37 PM | P | PASS |
|
|
Brad @ ###-####
PM Inspection
|
|
MEC12-01174
| Final | 4/18/2012 | 4/18/2012 | 4/18/2012 2:45:46 PM | P | PASS |
|
|
installer chuck ###-#### late p.m. please Phone #: ###-#### >> Inspection requested via web by Dustin Rich
|
|
MEC12-01146
| Final | 4/18/2012 | 4/18/2012 | 4/18/2012 2:23:21 PM | P | PASS |
|
|
please call when on way ###-#### >> Inspection requested via web by Dustin Rich
|
|
GCM12-00065
| GCM-Final | 4/17/2012 | 4/18/2012 | 4/18/2012 11:52:00 AM | A | PASS |
|
|
April @ ###-####
|
|
MEC12-01154
| Rough-in | 4/17/2012 | 4/18/2012 | 4/18/2012 10:47:36 AM | A | PART |
|
|
Dave Phone #: ###-####...hood clearances ok...grease duct light ok..make-up air ok
|
|
MEC11-03789
| Final | 4/17/2012 | 4/18/2012 | 4/18/2012 10:14:15 AM | A | PASS |
|
|
call 30 min berore arrival Phone #: ###-#### >> Inspection requested via web by Don Dowers
|
|
MEC12-01164
| Pressure Test | 4/17/2012 | 4/18/2012 | 4/18/2012 9:47:13 AM | A | NR |
|
|
Duct Blaster with 3rd Party Ingo Strupp is set for 9:00 AM Phone #: ###-#### >> Inspection requested via web by GREGORY ANDERSEN...n/r
|
|
MEC12-01164
| Rough-in | 4/17/2012 | 4/18/2012 | 4/18/2012 9:46:36 AM | A | FAIL |
|
|
Duct Blaster with 3rd Party Ingo Strupp is set for 9:00 AM Phone #: ###-#### >> Inspection requested via web by GREGORY ANDERSEN...duct blaster contractor didn't show up
|
|
MEC12-00553
| Conference | 4/17/2012 | 4/18/2012 | 4/17/2012 3:17:25 PM | A | PEND |
|
|
called conrad and told him duct blaster needs to be done at r/i
|