Inspections for the day of: Thursday, April 5, 2018.
Number of inspections: 19
Percentage of inspections complete: 100 %
Percentage of inspections not complete: 0 %
Contact Information
InspectorJim Storey
TitleBLD-COM/RES INSPECTOR
Phone #794-9490
Permit NumberDescriptionReceivedRequestedCompletedAM/PMDisposition 
BLD18-00880 BLD-Foundation4/5/20184/5/20184/6/2018 7:18:39 AMPPASS
Jeremy Phone #: ###-####
BLD16-04571 BLD-Final4/4/20184/5/20184/5/2018 3:39:04 PMPPASS
Call ahead to meet // Bill Phone #: ###-####
BLD16-04571 DOC - Permit Finaled4/5/20184/5/20184/5/2018 3:38:52 PMPPASS
BLD18-01073 BLD-Framing/Rough-in4/4/20184/5/20184/5/2018 3:09:56 PMPPASS
Phone #: ###-#### Inspection requested via web by Rick Stevens header ok/ ok to cover wall
BLD18-00726 BLD-Wall Bracing4/5/20184/5/20184/5/2018 2:44:03 PMPPASS
shear // Nate Phone #: ###-####
BLD18-00941 BLD-Footing4/5/20184/5/20184/5/2018 2:13:55 PMPPASS
call for access--Fred Phone #: ###-####
BLD18-00940 BLD-Footing4/5/20184/5/20184/5/2018 2:13:40 PMPPASS
call for access--Fred Phone #: ###-####
BLD18-00994 BLD-Final4/4/20184/5/20184/5/2018 1:04:58 PMPPASS
Phone #: ###-#### Inspection requested via web by Hans Weikl
BLD18-00994 DOC - Permit Finaled4/5/20184/5/20184/5/2018 1:04:45 PMPPASS
MIS18-00113 BLD-Conference4/5/20184/5/20184/5/2018 1:04:24 PMPPASS
informed home owner/ contractor not on site
BLD17-03812 BLD-Aging Inspection4/5/20184/5/20184/5/2018 1:03:26 PM PASS
no call for final.
BLD17-03837 BLD-Final4/4/20184/5/20184/5/2018 11:29:20 AMAFAIL
Qwen Phone #: ###-#### R311.7.5.1 Risers.
The maximum riser height shall be 73/4 inches (196 mm). The riser shall be measured vertically between leading edges of the adjacent treads. The greatest riser height within any flight of stairs shall not exceed the smallest by more than 3/8 inch (9.5 mm). Risers shall be vertical or sloped from the underside of the nosing of the tread above at an angle not more than 30 degrees (0.51 rad) from the vertical. Open risers are permitted provided that the opening between treads does not permit the passage of a 4-inch-diameter (102 mm) sphere.

Exception: The opening between adjacent treads is not limited on stairs with a total rise of 30 inches (762 mm) or less.

R311.7.5.2 Treads.
The minimum tread depth shall be 10 inches (254 mm). The tread depth shall be measured horizontally between the vertical planes of the foremost projection of adjacent treads and at a right angle to the tread’s leading edge. The greatest tread depth within any flight of stairs shall not exceed the smallest by more than 3/8 inch
BLD18-00297 BLD-Framing/Rough-in4/4/20184/5/20184/5/2018 11:15:55 AMAPASS
Phone #: ###-#### Inspection requested via web by Ryan Lierman
BLD17-03844 BLD-Final4/4/20184/5/20184/5/2018 10:22:10 AMAFAIL
Qwen- Phone #: ###-#### R312.1.1 Where required.
Guards shall be located along open-sided walking surfaces, including stairs, ramps and landings, that are located more than 30 inches (762 mm) measured vertically to the floor or grade below at any point within 36 inches (914 mm) horizontally to the edge of the open side. Insect screening shall not be considered as a guard.
BLD17-04558 BLD-Foundation4/4/20184/5/20184/5/2018 9:55:46 AMAPASS
call when done- Ben Phone #: ###-####
MIS17-00213 MIS-Aging Inspection4/5/20184/5/20184/5/2018 9:26:48 AM PASS
bld complet
MIS17-00213 DOC - Permit Finaled4/5/20184/5/20184/5/2018 9:26:27 AMPPASS
MIS17-00439 MIS-Aging Inspection4/5/20184/5/20184/5/2018 9:25:36 AM PASS
plm
MIS17-00439 DOC - Permit Finaled4/5/20184/5/20184/5/2018 9:25:17 AMPPASS