ELE05-01896
| Temporary Service | 5/31/2005 | 5/31/2005 | 5/31/2005 4:22:48 PM | P | FAIL |
|
|
please call prior to inspection///carl ###-#### met with owner and told him to use approved gec clamp to rod, and to prevent abrasion of gec thru panel, then to call when ready
|
ELE05-01888
| Permanent Service | 5/27/2005 | 5/31/2005 | 5/31/2005 3:53:39 PM | P | FAIL |
|
|
###-#### Lisa called and talked to contractor to provide abrasion protection for gnd electrode cond. left corr notice. 300.5
|
ELE05-01895
| Permanent Service | 5/31/2005 | 5/31/2005 | 5/31/2005 2:44:47 PM | P | PASS |
|
|
chuck ###-#### p/s u/g exst pedestal ok
|
ELE05-01897
| Rough-In Permanent Service | 5/31/2005 | 5/31/2005 | 5/31/2005 12:36:52 PM | P | PASS |
|
|
darren ###-#### called contr about np, gnd bush,box set-back. ric ok, p/s u/g n ok
|
ELE05-01872
| Electrical Rough-In | 5/31/2005 | 5/31/2005 | 5/31/2005 8:59:24 AM | A | FAIL |
|
|
Scheduled by a contractor via Hello! on 5/31/2005 at 6:39:39 AM. called contr, left message, left corr notice, do not cover tag. 110.12(C) there shall be no damaged parts, 300.4(D) cable shall be 1 1/4" from edge of framing member. BCC job id
|
ELE05-01097
| Final | 5/26/2005 | 5/31/2005 | 5/31/2005 8:40:13 AM | A | PASS |
|
|
Scheduled by a contractor via Hello! on 5/26/2005 at 1:49:24 PM. Contact: ###-####. corr made, ok to final
|