MEC01-01187
| MEC-Aging Inspection | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | | PASS |
|
|
|
MEC01-01025
| MEC-Aging Inspection | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | | PASS |
|
|
|
MEC01-01006
| MEC-Aging Inspection | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | | PASS |
|
|
|
MEC01-01013
| MEC-Aging Inspection | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | | PASS |
|
|
|
MEC01-01023
| MEC-Aging Inspection | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | | PASS |
|
|
|
MEC01-01007
| MEC-Aging Inspection | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | | CANC |
|
|
|
MEC01-00913
| MEC-Aging Inspection | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | | CANC |
|
|
|
MEC01-01326
| Pressure Test | 7/9/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | A | FAIL |
|
|
pressure test failed, and no drawings of piping, engineered drawings required for 2# system, no table in 97 umc 7/10/2001 10:43:13 AM
|
MEC01-01873
| Pressure Test | 7/9/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | A | PASS |
|
|
gas piping into new garage for unit heater has been removed, pipe to dryer and unit heater was undersized, ok for just dryer. 7/10/2001 12:16:06 PM
|
MEC01-01591
| Rough-in | 7/9/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | A | PASS |
|
|
both towers ok for cover 7/10/2001 11:27:34 AM
|
MEC01-01996
| Rough-in | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | P | PASS |
|
|
r/i-- ###-#### jerry r/i
|
MEC01-01996
| Pressure Test | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | P | PASS |
|
|
jerry-- ###-#### pres test
|
MEC01-01175
| Final | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | P | PASS |
|
|
Scheduled by a contractor via Hello! on 07/10/2001 at 09:47:47. Contact: ###-####.
|
MEC01-01844
| Rough-in | 7/10/2001 | 7/10/2001 | 7/10/2001 12:00:00 AM | P | FAIL |
|
|
dryer vents covered in walls and to many 90 degree elbows used in dryer vent sections that are 5". icbo interpertation allows 28.5' of horizontal with a deduct of 6' for each 90 used. talked to jeff from western 7/10/2001 3:17:34 PM
|