ELE05-02732
| Electrical Rough-In | 7/28/2005 | 7/29/2005 | 7/29/2005 3:48:54 PM | P | PASS |
|
|
Need bonding and potting inspection please; Phone #: ###-#### Internet Inspection Request from: Paul Young u/g to pool light ok, potting and bonding ok
|
ELE05-01709
| Final | 7/29/2005 | 7/29/2005 | 7/29/2005 3:47:51 PM | P | PASS |
|
|
lynn; Phone #: ###-#### Internet Inspection Request from: Cathy Chiles ok to final
|
ELE05-02642
| Electrical Rough-In | 7/29/2005 | 7/29/2005 | 7/29/2005 2:35:22 PM | P | PASS |
|
|
brian; Phone #: ###-#### Internet Inspection Request from: Barbara Moore u/g ok to cover from pavement to xfmr
|
ELE05-02740
| Rough-In Permanent Service | 7/29/2005 | 7/29/2005 | 7/29/2005 1:20:14 PM | P | PASS |
|
|
charlie ; Phone #: ###-#### Internet Inspection Request from: Marsha Smylie ric ok, p/s u/g n ok
|
ELE05-02741
| Temporary Service | 7/29/2005 | 7/29/2005 | 7/29/2005 12:49:30 PM | P | PASS |
|
|
jim ###-#### t/s o/h n ok
|
ELE05-02717
| Electrical Rough-In | 7/28/2005 | 7/29/2005 | 7/29/2005 10:01:30 AM | A | PASS |
|
|
Scheduled by a contractor via Hello! on 7/28/2005 at 1:31:01 PM. Contact: ###-####. ok to cover walls
|
ELE05-00768
| Final | 7/28/2005 | 7/29/2005 | 7/29/2005 9:14:35 AM | A | PASS |
|
|
reinspection of final; Phone #: ###-#### Internet Inspection Request from: BRIAN KEITH corrections made, ok to final
|
ELE05-02727
| Final | 7/28/2005 | 7/29/2005 | 7/29/2005 9:13:07 AM | A | PASS |
|
|
mike-- ###-#### ok to final
|
ELE05-01909
| Final | 7/28/2005 | 7/29/2005 | 7/29/2005 8:25:51 AM | A | PASS |
|
|
Scheduled by a contractor via Hello! on 7/28/2005 at 3:30:03 PM. Contact: ###-####. ok to final
|
ELE05-02634
| Electrical Rough-In | 7/29/2005 | 7/29/2005 | 7/29/2005 8:17:26 AM | A | FAIL |
|
|
rough in to cover seth is contact; Phone #: ###-#### Internet Inspection Request from: Ryan Christensen talked to contr, left corr notice, do not cover card on panel. 110.26(F)(1) no piping shall be in dedicated electrical space over meter can, 348.30(A) fmc shall be strapped within 12" of box, 300.4(A)(1) raceways shall be min 1 1/4" from edge of framing member or shall be protected by steel plates
|