Inspections for the day of: Friday, August 11, 2006.
Number of inspections: 9
Percentage of inspections complete: 100 %
Percentage of inspections not complete: 0 %
Contact Information
InspectorJim Johnson
TitlePLM-INSPECTOR
Phone #794-9476
Permit NumberDescriptionReceivedRequestedCompletedAM/PMDisposition 
PLM06-02677 Sprinkler (Final)8/11/20068/11/20068/11/2006 4:15:47 PMPPASS
PLM06-02699 Plumbing Rough-in8/11/20068/11/20068/11/2006 3:30:27 PMPPASS
rod; Phone #: ###-#### Internet Inspection Request from: Cathy Chiles
PLM06-02724 Water and/or Sewer8/11/20068/11/20068/11/2006 3:10:14 PMPPASS
travis; Phone #: ###-#### Internet Inspection Request from: Barbara Buckley
PLM06-02724 DOC - Permit Finaled8/11/20068/11/20068/11/2006 3:10:03 PMPPASS
travis; Phone #: ###-#### Internet Inspection Request from: Barbara Buckley
PLM06-02726 Groundwork8/11/20068/11/20068/11/2006 2:51:13 PMPPASS
joe; Phone #: ###-#### Internet Inspection Request from: Cathy Chiles
PLM05-04309 Plumbing Rough-in8/10/20068/11/20068/11/2006 2:33:53 PMAPART
Scheduled by a contractor via Hello! on 8/10/2006 at 4:32:14 PM. Contact: ###-####. third floor roof and over-flow drains vent,s for four room on west side of building test ok
PLM06-02695 Plumbing Rough-in8/11/20068/11/20068/11/2006 1:24:39 PMPPART
harold - partial on storm drains; Phone #: ###-#### Internet Inspection Request from: Barbara Buckley strom drain from buidingto pit test ok still need to make tie -in,s at building
PLM06-02684 Water and/or Sewer8/10/20068/11/20068/11/2006 12:05:52 PMAPART
swr line ###-####- for one of the 28 swr lines ten sewer line extension from west boise sewer line easement to lot property line,s from west side to east portion of subdivision test ok
PLM06-02706 Water and/or Sewer8/10/20068/11/20068/11/2006 10:15:29 AMAPART
Jesse is the maint. supervisor to contact. Thank you; Phone #: ###-#### Internet Inspection Request from: Scott Wickstrom rough-in for washing machine test ok need to provide protective covering on exposed piping in women restroom next to washing machine location where drain and water tie -in,s was made. note - if dryer vent to be made by plumbing contractor need to pull a mechanical permit and have inspected by mechanical inspector