FIRE-Final Inspection | 6/20/2000 | 6/21/2000 | 6/21/2000 | A | PASS |
Rick Jackson
|
|
|
Yes he has an assembly permit through the clerks
|
BLD-Final | 6/20/2000 | 6/20/2000 | 6/20/2000 | P | PASS |
|
|
|
Added by Inspector: 338 On 6/20/00 made ok for occ req card signoff by office
|
Permanent Occupancy | | 6/20/2000 | 6/20/2000 | | DONE |
|
|
|
|
Permanent Occupancy | | 6/20/2000 | 6/20/2000 | | DONE |
|
|
|
|
BLD-Final | 3/22/2000 | 3/23/2000 | 3/23/2000 | A | PART |
Russ Owen
|
|
|
Steve Youngerman ###-#### Need fire life safety 3/23/00 1:37:14 PM
|
BLD-Final | 3/23/2000 | 3/23/2000 | 3/23/2000 | P | PART |
|
|
|
###-#### RICK WILL BE THERE AT 1:30 temp made ok 03/24/2000 8:44:55 AM
|
FIRE-Final Inspection | 3/23/2000 | 3/23/2000 | 3/23/2000 | P | PART |
Rick Jackson
|
|
|
HE SAID YOU COULD DO THIS AT 1:30 // ###-#### Need assembly permit 3/24/00 1:08:48 PM
|
BLD-Conference | 3/21/2000 | 3/21/2000 | 3/21/2000 | A | CANC |
Rick Jackson
|
|
|
Ready at PM
|
FIRE-Conference | 3/21/2000 | 3/21/2000 | 3/21/2000 | | PART |
Rick Jackson
|
|
|
Exiting; extinguishing system requirements 3/22/00 9:21:37 AM
|
BLD-Framing/Rough-in | 3/14/2000 | 3/14/2000 | 3/14/2000 | P | PART |
|
|
|
fireshaft bob ###-#### framing for the rsted shaft made ok 3/14/00 4:56:29 PM
|
BLD-Framing/Rough-in | 3/8/2000 | 3/9/2000 | 3/9/2000 | A | PART |
|
|
|
Bob ###-#### met with contr. discussed the assy to be used for the grease shaft and the termination of same top and bottom per 337 top must terminate at the elevation above the highest roof. 3/9/00 10:19:34 AM
|
BLD-Framing/Rough-in | 3/6/2000 | 3/7/2000 | 3/7/2000 | A | PART |
Russ Owen
|
|
|
###-#### Suggested meeting with mechanical inspector for hood exhaust. 3/7/00 1:43:26 PM
|
BLD-Framing/Rough-in | 2/17/2000 | 2/18/2000 | 2/18/2000 | A | FAIL |
Jim Storey
|
|
|
bob ###-#### fr No access to bldg. unable to see if beam's were reeingieered for size. 2/22/00 10:15:09 AM
|