(HOBSON FABRICATING)(COATING ROOM REMODEL) To remodel a 3750 portion of an existing fabrication building for installation of four separate application booths, one booth will be used for sandblasting, one for primer coating, one for powder coating and one drying oven. This portion of builidng was previously constructed with the original builidng as an open sided canopy under permit bld97-00447. Under this permit the walls will beinfilled between supporting columns to create an enclosed room. Work will include construction of a one-hour fire-rated exterior wall 46'8" long that is withing 20 ft of the property line the remaining wall will be constructed with nonrated noncombustible construction, two exit doors will be installed, fire sprinkler system will be extended per NFPA #13, mechanical exhaust system shall be installed per UMC & UFC, fabrication booths shall be installed per the requirements of the UFC. This building is currently fully fire sprinklered for area increase, all modifications to the system shall be per NFPA #13 as regulated by the fire department. (pc056-02)rmh