Information based on query as of Tuesday, July 16, 2024.
Permit Information
Permit NumberBLD02-00591
StatusFinaled
Name STRITE DESIGN + REMODEL
Site Address 1213 N 25TH ST
Project Name 
Customer Number 
ePlanReviewNo
Description
For the construction of a 234s.f. addition to an existing 2-story dwelling. Some girder / header sizes will be determined by an engineer as the project allows as the structure is opened up. All work per the approved plans as marked and engineerein supplied to the structural inapector as available. R-1C setbacks ok per rhj. pep
Contact Information
See Activities list for contact information
Show All Activities
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
BLD-Final7/29/20027/30/20027/30/2002APASS
DetailsTony Young
###-#### gary hand rail inspect
BLD-Final7/26/20027/29/20027/29/2002PFAIL
DetailsTom Arcoraci
###-#### needs handrail at new rear porch then ok for lc 7/29/2002 2:39:11 PM
BLD-Conference5/13/20025/13/20025/13/2002APASS
DetailsCarl Dependahl
w/ bldr re insul.
BLD-Conference5/13/20025/13/20025/13/2002APASS
DetailsCarl Dependahl
w/ bldr...frame ok to cover per 415. 5/13/2002 4:21:40 PM
BLD-Energy code compliance5/6/20025/6/20025/13/2002PPART
DetailsCarl Dependahl
###-#### JEFF...previously ok'd by 415??? 5/13/2002 10:05:55 AM
BLD-Framing/Rough-in5/6/20025/7/20025/7/2002APASS
DetailsTony Young
BLD-Framing/Rough-in5/3/20025/6/20025/6/2002APASS
DetailsTony Young
###-#### JEFF
BLD-Framing/Rough-in5/2/20025/2/20025/2/2002PNR
DetailsJim Storey
1. need ele insp./ nail joist hangers

2. umc 603.2 replace exsusted duct.

3. tie south bearing wall to exsting bldg.

4. TRUSS ENGINEERING - The design and fabrication of metal plate connected wood trusses shall be in accordance with ANSI/TPI 1-1995. (1997 UBC 2321.1) Each truss shall be legibly branded, marked or otherwise have permanently affixed thereto the following information located within 2 feet of the center of the span on the face of the bottom chord: (1) Identity of the company manufacturing the truss. (2) The design load. (3) The spacing of trusses. (1997 UBC 2321.4) Provide truss specifications to the Building Inspector prior to inspection.

5. ATTIC ACCESS - An attic access opening shall be provided to attics of buildings with combustible ceiling or roof construction. The opening shall be located in a corridor, hallway, or other readily accessible location. Attics with a maximum vertical height of less than 30 inches need not be provided with access openings. The opening shall not be less than 22 inches by 30 inches. A minimum clear headroom of at least 30 inches shall be provided at or above the access opening. 1994 UBC 1505.1

6. calk and seal to meet boise city engery code.
BLD-Framing/Rough-in4/30/20025/1/20025/1/2002APART
DetailsDave Hannah
shear jeff -###-#### ext ok to cover 5/1/2002 10:41:32 AM
BLD-Foundation3/27/20023/28/20023/28/2002APASS
DetailsCarl Dependahl
JEFF ###-#### chk bsmt ftg at frame 3/28/2002 10:48:17 AM
BLD-Footing3/26/20023/27/20023/27/2002APART
DetailsCarl Dependahl
###-#### JEFF; ext ftgs ok, chk bsmt int ftg at frame insp or? see plan. 3/27/2002 10:53:59 AM