(SIMPLOT RECORDS)(ADDITIONAL RACKING/SHELVING) To construct additional steel storage racking/shelving within an existing warehouse building per approved plans and structural engineering. SPECIAL INSPECTIONS ARE REQUIRED. Work to include: To install 3,510 square feet (Area 'A' - 1,550 sq.ft. + Area 'B' - 1,960 sq. ft.), 8'-9" high, new "Rapid Rack" record storage units which include 5 shelves per rack. Each unit holds 100 record boxes, will have 6" fire flues, be bolted to the floor, and have 48" isles between rows. Area "A" will add an approximate size being 61' wide X 32' deep. Area "B" will add an approximate size being 41' wide X 49' deep. The design, testing and utilization of industrial steel storage racks shall be in accordance with the RMI Specification for the Design, Testing and Utilization of Industrial Steel Storage Racks. A Letter of Completion is to be issued when done. The existing envelope is not being affected by this permit. NOTE: This building is fully fire sprinklered for area increase, any alterations or modifications to the sprinkler system shall be per NFPA 13 as regulated by the fire department. EACH RACKING SYSTEM SHALL HAVE A PLAQUE LOCATED AT EACH RACKING SYSTEM STATING THE MAXIMUM WEIGHT TO BE STORED ON THAT PERTICULAR RACKING SYSTEM PER THE ENGINEERS CRITERIA STATED ON THE PLANS FOR EACH RACKING SYSTEM. **SRZ**