(NAPA STORE - RACKING) To install a two tiered steel storage racking system exceeding 8' in height within a tenant space per structural engineering and approved plans. SPECIAL INSPECTIONS ARE REQUIRED. Each unit will be bolted to the floor and have more than 36" isles between rows. The design, testing and utilization of industrial steel storage racks shall be in accordance with the RMI/ANSI MH 16.1. A Letter of Completion is to be issued when done. The existing envelope is not being affected by this permit. EACH RACKING SYSTEM SHALL HAVE A PLAQUE LOCATED AT EACH RACKING SYSTEM STATING THE MAXIMUM WEIGHT TO BE STORED ON THAT PERTICULAR RACKING SYSTEM PER THE ENGINEERS CRITERIA STATED ON THE PLANS FOR EACH RACKING SYSTEM. NOTE: The new building was constructed under permit BLD12-01698. "This building is fully Fire Sprinklered for. Any alterations or modifications to the buildings Fire Sprinkler WILL REQUIRE A SEPARATE PERMIT and shall be installed per NFPA 13 as regulated by the Boise Fire Department." **SRZ**