(COMMERCIAL TIRE - RACKING) Install new steel storage racking for tire storage exceeding 8' in height per structural engineering and approved plans. Work to include: Install 6,000 square feet of racking including aisles per engineering, attached plan review report, and the structural inspectors final approval. Powers Wedge-Bolt + screw anchors (ESR-2526) are called out to anchor racks. SPECIAL INSPECTIONS ARE REQUIRED. The design, testing and utilization of industrial steel storage racks shall be in accordance with the RMI/ANSI MH 16.1. A Letter of Completion is to be issued when done. Tenant building permit done under BLD12-03094. The existing envelope is not being affected by this permit. NOTE: This building is fully fire sprinklered for area increase, any alterations or modifications to the sprinkler system shall be per NFPA 13 as regulated by the fire department. EACH RACKING SYSTEM SHALL HAVE A PLAQUE LOCATED AT EACH RACKING SYSTEM STATING THE MAXIMUM WEIGHT TO BE STORED ON THAT PERTICULAR RACKING SYSTEM PER THE ENGINEERS CRITERIA STATED ON THE PLANS FOR EACH RACKING SYSTEM. **SRZ**