(WESTERN POWER SPORTS **RACKING**) (SPECIAL INSPECTION REQUIRED ON ANCHOR BOLTS)Permit to add 28 foot tall storage racking in an existing warehouse with storage up to 30’. Work to include: installation of prefabricated 28 foot tall engineered storage racking including seismic bolting to existing slab. Approval of this permit is contingent on adhering to approved plans and engineering. The design, testing and utilization of industrial steel storage racks shall be in accordance with the RMI Specification for the Design, Testing and Utilization of Industrial Steel Storage Racks. (Special inspections on the anchor bolts are required per ICC/ESR - 2713) The new racking may require additional exit signage be installed. Exit signs shall meet IBC 1011, Exits and exit access doors shall be marked by an approved exit sign readily visible from any direction of egress travel. The path of egress travel to exits and within exits shall be marked by readily visible exit signs to clearly indicate the direction of egress travel in cases where the exit or the path of egress travel is not immediately visible to the occupants. Intervening means of egress doors within exits shall be marked by exit signs. Exit sign placement shall be such that no point in an exit access corridor or exit passageway is more than 100 feet (30 480 mm) or the listed viewing distance for the sign, whichever is less, from the nearest visible exit sign. Addition permitted under BLD13-01792. This building if fully fire sprinklered. **ajs**