MICRON BUILDING #16 EXISTING YE/YA REMODEL (PROJECT #1911) * TO DEMOLISH AND REMOVE ALL INTERIOR PARTITIONS, CEILINGS AND APPLICABLE MECHANICAL AND ELECTRICAL WORK AT AREAS 109A-109M AND 110B, AS WELL AS, DEMOLISH AND REMOVE PORTIONS OF THE ONE-HOUR CORRIDOR WALL AND THE TWO-HOUR AREA SEPARATION WALL TO ACCOMODATE THE INSTALLATION OF NEW FIRE RATED DOOR ASSEMBLIES ON THE FIRST FLOOR AND TO DEMOLISH AND REMOVE THE INTERIOR PARTITIONS AND DOORS FROM AREAS 204AG, 205B AND 205C ON THE SECOND FLOOR. THE FIRST FLOOR IS TO BE REMODELED AS A NEW 360 SQ. FT. BOOTIE ROOM-114A AND A 500 SQ. FT. SMOCK ROOM-114B RELOCATED FROM FAB #3, A 75 SQ. FT. VESTIBULE-114E, A 1630 SQ. FT. PHOTO AREA-114C WITH A SERVICE AISLE AND A 310 SQ. FT. SERVICE ENTRY-114D. THE 4700 SQ. FT. AREA OF THE SECOND LEVEL WILL BE REMODELED AS REQUIRED TO ACCOMODATE THE NEW REQUIRED MECHANICAL EQUIPMENT TO SUPPORT THE NEW REMODELED AREAS BELOW ON THE FIRST FLOOR. THE AREAS OF CONSTRUCTION IS LOCATED EAST OF THE EXIT CORRIDOR EAST OF GRID LINE N AND BETWEEN GRID LINES 2 AND 10. ALL CONSTRUCTION PER THE APPROVED PLANS AND ATTACHED REQUIREMENT LIST. #97-545/JCM