Final | 6/14/2004 | 6/15/2004 | 6/15/2004 | A | PASS |
William E Thomas
|
|
|
terry; Phone #: ###-#### Internet Inspection Request from: Annette Moore
final ok 6/15/2004 9:43:06 AM
|
Final | 6/3/2004 | 6/4/2004 | 6/4/2004 | A | CANC |
Pat Lass
|
|
|
Bob; Phone #: ###-#### Internet Inspection Request from: Aimee Hughes
|
Final | 4/5/2004 | 4/6/2004 | 4/6/2004 | A | FAIL |
Pat Lass
|
|
|
PLease call 1/2 hour prior to inspetion///ED; Phone #: ###-#### Internet Inspection Request from: Barbara Moore
I don't have enough access to inspect the hot tub.
430.14 Location of Motors.
(A) Ventilation and Maintenance. Motors shall be located so that adequate ventilation is provided and so that maintenance, such as lubrication of bearings and replacing of brushes, can be readily accomplished.
210.70 Lighting Outlets Required.
Lighting outlets shall be installed where specified in 210.70(A), (B), and (C).
(A) Dwelling Units. In dwelling units, lighting outlets shall be installed in accordance with 210.70(A)(1), (2), and (3).
Light required by back door.
110.2 Approval.
The conductors and equipment required or permitted by this Code shall be acceptable only if approved,
and such approvals are based on tests and listings of testing laboratories.
Top add-on to hot tub shall be listed or field evaluated.
680.26 Bonding.is incomplete
(A) Performance. The bonding required by this section shall be installed to eliminate voltage gradients in the pool area as prescribed.
FPN:This section does not require that the 8 AWG or larger solid copper bonding conductor be extended or attached to any remote panelboard, service equipment, or any electrode.
334.30 Securing and Supporting.
Nonmetallic-sheathed cable shall be secured by staples, cable ties, straps, hangers, or similar fittings designed and installed so as not to damage the cable at intervals not exceeding 1.4 m (41/2 ft) and within 300 mm (12 in.) of every cabinet, box, or fitting. Flat cables shall not be stapled on edge.
In basement by light fixture above dryer recep..
110.12 Mechanical Execution of Work.
Electrical equipment shall be installed in a neat and workmanlike manner.
(A) Unused Openings. Unused cable or raceway openings in boxes, raceways, auxiliary gutters, cabinets, cutout boxes, meter socket enclosures, equipment cases, or housings shall be effectively closed
In panel in stairway. Also install inhibitor on ground wire and insure that all strands are in tact.
4/6/2004 10:03:29 AM
|
Final | 4/6/2004 | 4/6/2004 | 4/6/2004 | P | PART |
Pat Lass
|
|
|
###-#### terry
all inside corrections were made.
Light location and hot tub inspection and listing for cover remain undone 4/6/2004 1:53:27 PM
|
Permanent Service | 4/6/2004 | 4/6/2004 | 4/6/2004 | A | PASS |
Pat Lass
|
|
|
P/S O/H R Ok
|
Electrical Rough-In | 2/4/2004 | 2/5/2004 | 2/5/2004 | A | PART |
Jim Schmer
|
|
|
ed- ###-#### out side walls 2/5/2004 10:28:32 AM
|