Information based on query as of Sunday, June 30, 2024.
Permit Information
Permit NumberELE05-03599
StatusFinaled
Name MOUNTAIN VIEW ELECTRIC
Site Address 4602 N SEYMOUR DR
Project Name 
Customer Number 
ePlanReview 
Description
Contact Information
See Activities list for contact information
Show All Activities
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
Final2/20/20062/21/20062/21/2006APASS
DetailsBob Reichert
Scheduled by a contractor via Hello! on 2/20/2006 at 5:13:29 PM. Contact: ###-####. corr made, ok to final
Final2/7/20062/7/20062/7/2006PFAIL
DetailsBob Reichert
Dan -- call 1st before insp for key access; Phone #: ###-#### Internet Inspection Request from: Elizabeth Esong called contr,left corr notice,210.52(H) hallway over 10' shall have receptacle, 406.5 recpt faceplate shall seat against mounting surface(library), 404.4 switch shall not be installed in tub area,440.6(A) min breaker size for a/c shall be 45A, 430.107 pump motor disconnect shall be readily accessible,680.73 electrical equipment for tub shall be accessible without damaging building, 408.4 circuit directory shall be complete and specific for each circuit (identify 2 small appliance branch circuits in kitchen)
Electrical Rough-In12/22/200512/22/200512/22/2005APASS
DetailsBob Reichert
Scheduled by a contractor via Hello! on 12/22/2005 at 7:10:09 AM. Contact: ###-####. ok to cover floor heat in master bath
Rough-In Permanent Service10/6/200510/6/200510/6/2005APASS
DetailsBob Reichert
Scheduled by a contractor via Hello! on 10/6/2005 at 6:13:44 AM. Contact: ###-####. corr made, ric ok, p/s u/g n ok
Electrical Rough-In10/5/200510/5/200510/5/2005AFAIL
DetailsBob Reichert
Scheduled by a contractor via Hello! on 10/5/2005 at 7:23:06 AM. Contact: ###-####. called contr, left corr notice, 312.5 abrasion protection for gec, 250.24(A)(1) gec shall be connected to gnded conductor term or bus, 210.52 recpt shall be on front of dwelling, 110.12(C) there shall be no broken parts, 300.4(A)(1) and (D) 1 1/4" shall be maintained for holes from edge of framing member and nm cable