Information based on query as of Thursday, July 18, 2024.
Permit Information
Permit NumberELE06-02057
StatusFinaled
Name ENTERPRISE ELECTRIC
Site Address 8778 W FAIRVIEW AVE
Project Name 
Customer Number 
ePlanReview 
Description
Electrical Permit - Alteration: REMODEL OF EXISTING THEATER ROOM. INSTALL NEW SUB-PANEL WITH NEW DISCONNECT. INSTALL NEW LOW-VOLTAGE THEATER LIGHTING. ///Final value is no change 10/25/06 LEG
Contact Information
See Activities list for contact information
Show All Activities
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
Final9/14/20069/15/20069/15/2006APASS
DetailsBob Reichert
WE ARE READY FOR FINAL INSPECTION OF THE THEATER ROOM. THERE WILL BE AN EMPLOYEE OF THE STORE THERE ANY TIME AFTER 9:00 AM. BREN WOULD BE THE BEST CONTACT AT THE STORE AND IF YOU HAVE ANY OTHER QUESTIONS, PLEASE FEEL FREE TO CONTACT BRIAN KEITH AT THE OFFICE AT ###-####. THANK YOU.; Phone #: ###-#### Internet Inspection Request from: BRIAN KEITH ok to final
ELE-Aging Inspection8/14/20068/14/20068/14/2006 NR
DetailsBob Reichert
called, suc
Electrical Rough-In6/13/20066/13/20066/13/2006PPASS
DetailsMike Kinnear
NEED ROUGH- IN ON NEW PANEL. THANK YOU.; Phone #: ###-#### Internet Inspection Request from: BRIAN KEITH ok cover walls & ceiling sub panel area
Electrical Rough-In6/6/20066/7/20066/7/2006APASS
DetailsPat Lass
We are ready for rough-in inspection with the corrections. We will have people on site by 9:00 working on the Panel and the Feeder to the Panel along with the employees from the Stereo Shoppe. If you have any questions, you can contact Brian Keith at ###-####. Thank you.; Phone #: ###-####
Electrical Rough-In6/5/20066/6/20066/6/2006AFAIL
DetailsBob Reichert
WE ARE READY FOR A ROUGH-IN FOR COVER FOR THE THEATER AND EQUIPMENT ROOM. THE PANEL IS NOT READY FOR INSPECTION AT THIS TIME. WE WOULD LIKE TO HAVE THE OK TO COVER IN THE THEATER ROOM WHILE WE COMPLETE THE SUB-PANEL. THE STORE DOES NOT OPEN UNTIL 10:00 AM, YOU CAN ASK FOR GREG NETTLES OR CRAIG ADAMS AT THE STORE.; Phone #: ###-#### Internet Inspection Request from: BRIAN KEITH called contr, left corr notice, 300.4(A)&(D) edge of holes and cables and raceways shall be 1 1/4" from edge of framing members, 352 & 362 there shall be not more than 4 quarter bends in raceway between pull points,BCC no u/g shall be covered before inspection