Final | 9/21/2007 | 9/21/2007 | 9/21/2007 | P | PASS |
Pat Lass
|
|
|
Phone #: ###-#### Internet Inspection Request from: Joe Thomas
|
Permanent Service | 8/30/2007 | 8/30/2007 | 8/30/2007 | P | PASS |
Pat Lass
|
|
|
Service inspection. This was a townhouse conversion Phone #: ###-#### Internet Inspection Request from: Joe Thomas P/S U/g N Ok
|
Permanent Service | 8/29/2007 | 8/29/2007 | 8/29/2007 | P | CANC |
Pat Lass
|
|
|
This unit and 620 N. 29th were converted to townhomes. We have waited on the service inspection until the conversion was complete. The other unit is permit # ELE07-03005. It will not allow me to schedule the other unit on phone or on line. I would like to get permanent service for both units. Please call if you have any questions. Phone #: ###-#### Internet Inspection Request from: Joe Thomas
|
Permanent Service | 8/29/2007 | 8/29/2007 | 8/29/2007 | P | CANC |
Pat Lass
|
|
|
Permanent service inspection. These units were converted to townhome from duplex. Rough in inspection was done but waited for conversion for service inspection Phone #: ###-#### Internet Inspection Request from: Joe Thomas Inspection cancelled from web by: Joe Thomas
|
Electrical Rough-In | 6/15/2007 | 6/15/2007 | 6/15/2007 | P | PASS |
Pat Lass
|
|
|
They are going to be converted to townhomes but are a duplex for now. we will call for service inspection and change the permiting once they recieve the townhome conversion Phone #: ###-#### Internet Inspection Request from: Joe Thomas
|
Electrical Rough-In | 6/14/2007 | 6/14/2007 | 6/14/2007 | P | FAIL |
Bob Reichert
|
|
|
These units are a duplex but are being converted to townhomes in the next couple of weeks. We have done the services as townhomes and will request a service inspection when the conversion is complete. Right now we are just requesting a rough in for cover. Phone #: ###-#### Internet Inspection Request from: Joe Thomas called, left correction notice, nec 300.4(A)&(D) edge of bored holes and nm cable shall be 1 1/4" from edge of framing member, 314.17(C) nm cable shall be stapled within 8" of box
|