Final | 12/22/2014 | 12/23/2014 | 12/23/2014 | P | PASS |
Rock A. Hudson
|
|
|
10 solar panels. AC micro-inverter system. No DC voltage. Enphase M250 Micro-Inverters, CSA, IEEE-1547, and UL-1741 listed. And 265 watt Suniva panels, ETL listed. A single home run, in conduit, is ran from solar array to the knife switch, located next to meter base on south side of home, next to garage door. From the knife switch to breaker in main panel, at the top of the busing, opposite the feeder lugs. The solar breaker and the knife switch are clearly marked for solar, and the solar circuit number identified in the knife switch and the panel schedule. The inverters, panels and rails are all bonded with a number 6 ground that runs back to the service electrode in main panel, and labeled.
The main panel is in the garage, so give the homeowner a call for access at 801.891.3603
Thanks guys Phone #: ###-#### Inspection requested via web by Ryan King Final ok
|
Electrical Rough-In | 12/23/2014 | 12/23/2014 | 12/23/2014 | P | PASS |
Rock A. Hudson
|
|
|
10 solar panels. AC micro-inverter system. No DC voltage. Enphase M250 Micro-Inverters, CSA, IEEE-1547, and UL-1741 listed. And 265 watt Suniva panels, ETL listed. A single home run, in conduit, is ran from solar array to the knife switch, located next to meter base on south side of home, next to garage door. From the knife switch to breaker in main panel, at the top of the busing, opposite the feeder lugs. The solar breaker and the knife switch are clearly marked for solar, and the solar circuit number identified in the knife switch and the panel schedule. The inverters, panels and rails are all bonded with a number 6 ground that runs back to the service electrode in main panel, and labeled.
The main panel is in the garage, so give the homeowner a call for access at 801.891.3603
Thanks guys Phone #: ###-#### Inspection requested via web by Ryan King Rough in ok cover
|