This fire alarm permit is to install 3 new area smoke detectors, In-Duct smoke detectors and increase the candela rating of an existing strobe. Building permit # BLD06-02302 is to remodel an existing 523 square foot room for upgrade and installation of a new CT scanner and all associated protections and equipment per approved plans and per manufacture's installation instructions for special applications. Special inspection of anchor bolting is required, Sheet A2.2. Selective interior of room demolition is to occur; lead lining & wall cover are to be added at interior room walls; structural plate & anchors to be installed for boom support at bottom of existing 2-hour concrete floor assembly; add 2 new doors, a new 45 minute door assembly/frame/hardware at 1-hour fire barrier penetration and a 90 minute door/frame/hardware assembly at door opening into the existing 2-hour exit passageway stair enclosure extension to the exterior; maintain and repair the existing 2-hour mechanical shafts and protect penetrations; install suspended ceiling grid system, light & mechanical fixture's and upgrade electrical, mechanical, plumbing, sprinkler & alarm systems to meet tenant needs and comply with current adopted codes and ordinances. This building is fully sprinklered for occupancy use group compliance. Separate applications, plans and permits are required for sprinkler system and alarm system modifications, as regulated by the fire department, before any work is done. A Certificate of Compliance is required for this project for final approval for use and occupancy. drs