Revised Work Scope: Area 2 Revision dated 07/17/08: Modify the existing system by adding and relocating heads to accommodate a new ceiling in the area indicated on the plans as Area 2. This plan modification affected 48 heads. The Permitted Work Scope: Over Head Only
Modify the existing system by adding and relocating heads on the Ground Floor to accommodate a new ceiling layout. The fire sprinkler system work shall comply with the IFC 2003, the attached review comments/conditions, as regulated by the Fire Chief. The review comments/conditions, permit and fire "Inspection Card" are required to be on site as a condition of this work, to provide witness of compliance verification of minimum code. This permit is attached to BLD07-01692.
When tenant work affects fire sprinkler protection outside the permitted work area due to the installation of tenant-demising or new partition walls, the affected area sprinkler coverage outside the BLD permit will fall under the Fire Permit scope of work, to maintain the required fire protection within the fire sprinklered facility. The “Riser” and its supplies which include all appurtenances (including tamper, alarm and alarm monitoring) relating to the normal and correct function and integrity of this system will fall under the jurisdiction for code compliant verification10/25/07 Revised Work Scope:
Modify the existing system by adding and relocating 6 heads on the Ground Floor to accommodate a new ceiling layout. These plans were originally submitted and approved under this same permit. This submittal is due to a plan modification. A Lounge and additional offices were added noted as Rev. 1 dated 10/23/07 This permit is attached to BLD07-01692.