Information based on query as of Sunday, August 18, 2024.
Permit Information
Permit NumberBLD00-03596
StatusFinaled
Name MICRON TECH PCS3718
Site Address 8000 FEDERAL WAY
Project NameMICRON BUILDING25 1ST FL
Customer NumberPCS3718
ePlanReviewNo
Description
MICRON BUILDING #25 - BACKFILL MAINTENANCE & INSTRUMENT SHOPS- (PCS 25-003718) TO CONSTUCT NEW 8 FOOT HIGH INTERIOR PARTITIONS, SUSPENDED CEILING, 8 FOOT HIGH CHAIN-LINK FENCE, MECHANICAL DUCTS AND PLUMBING PIPING TO CREATE A NEW 266 SQ. FT., INSPECTION SHOP #103C AND A 767 SQ. FT., TOOL CRIB AREA #104A. THIS PERMIT IS ALSO FOR CUTTING THE EXISTING CONCRETE SLAB AND INSTALLING TWO NEW 12" DEEP REINFORCED CONCRETE TOOL SUPPORT SLABS. ONE SLAB IS APPROXIMATELY 14'X38' AND THE OTHER IS APPROXIMATELY 14'X53'. THIS WORK IS BEING DONE ON THE FIRST FLOOR OF BUILDING #25 BETWEEN GRID LINES 4&8 AND A&F. ALL CONSTRUCTION PER THE APPROVED PLANS ON FILE. PC#1034-00/JCM
Contact Information
See Activities list for contact information
Show Inspection Activities Only
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
Letter of compliance  1/16/2002 DONE
Letter of Compliance #22129 issued 1-16-02.
BLD-Final11/23/200111/26/200111/26/2001APASS
DetailsJim Storey
Scheduled by Inspector: 301 On 11/23/2001 2:51:11 PM final ok card on site. l/c 11/26/2001 11:45:24 AM
BLD-Final11/21/200111/23/200111/23/2001ACANC
DetailsJim Storey
Scheduled by a contractor via Hello! on 11/21/2001 at 10:36:11. Contact: ###-####.
Fee Review-notes12/8/200012/8/200010/19/2001 DONE
Plan assigned to (JCM)12/11/2000 12/21/2000 PASS
DetailsJohn Menard
12/21/00 08:53:31 JCM - activity updated through activity BLDA022 from case BLD00-03596.
Routing - PLAN CHECK12/21/2000 12/21/2000 PASS
PLANS/APPL TAKEN TO FRONT DESK  12/21/2000 PASS
Inspection Record Card- Bld  12/21/2000 DONE
Print Occupancy Form  12/21/2000 DONE
Telephone call  12/21/2000 DONE
called ###-#### permit ready for pickup
Issue & PRINT to be Invoiced  12/21/2000 DONE
Routing - FIRE12/14/200012/19/200012/20/2000 DONE
DetailsBill Alexander
Plan Review Completed(1st rev)  12/20/2000 DONE
Plan Reviewer's activity  12/14/2000 PASS
PLANS REVIEWED AND APPROVED AS SUBMITTED. JCM
Routing - PLAN CHECK12/13/2000 12/14/2000  
Routing - PLUMBING12/12/2000 12/13/2000 PASS
provide traps and vents for equipment and fixtures as well as the sump, provide a gate valve and check valve at the sump discharge, if any solvents or flammable substances are used in any of the equipment an appropriate separator must be installed.
Routing - PUBLIC WORKS12/11/2000 12/12/2000 PASS
Plans ACCEPTED BY PLAN TECH  12/11/2000 DONE
Application received  12/8/2000