Information based on query as of Wednesday, July 17, 2024.
Permit Information
Permit NumberBLD06-00475
StatusFinaled
Name MICRON TECHNOLOGY INC
Site Address 8000 S FEDERAL WAY
Project Name 
Customer NumberC8790
ePlanReviewNo
Description
Micron Building #24C - (C8790) - Remodel Fab 4A in Building 24C to raise the clean room ceiling from ten foot height to fourteen foot height to accommodate new tool sizes. This work includes structural modifications to the interstitial floor area, additional structural roof supports for relocation of scrubber ducts and mechanical equipment, trench and install approximately 100 lineal feet of 4'-6" and 8'-0" wide by 4'-0" foot deep reinforced concrete equipment trenches at the subfab. and the demo and reconstruction of fab clean walls, hepa filter ceilng grids and interior doors. There is also significant mechanical, electrical and process piping modifications associated with this remodel project. This work is being done in Building #24C between grid lines #18&25 and #D&F at an approximate 6,675 sq. ft. area of the subfab, a 10,280 sq. ft. area of the main floor fabrication area and 10,190 sq. ft. of the interstitial space. All construction per the approved plans. JCM
Contact Information
See Activities list for contact information
Show Inspection Activities Only
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
Second Notice BLD12/27/200612/27/20061/8/2007 DONE
First Notice has not been responded to.
First Notice10/16/200610/16/200612/27/2006 DONE
DetailsJim Storey
BLD-Final10/11/200610/16/200610/16/2006APASS
DetailsJim Storey
Final raise the ceiling permit. Meet Greg at cube in bld. 25. cell ###-####.; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes
DOC - Permit Finaled10/16/200610/16/200610/16/2006PPASS
DetailsJim Storey
BLD-Final9/22/20069/29/20069/29/2006APART
DetailsJim Storey
Final inspection for open the new Fab to production. RTC C8790. Meet at Greg's cube or behind bld. 24C.; Phone #: ###-#### Internet Inspection Request from: Greg sub fab fire stopping corect in aplacation of collor assemblies wip
FIRE-Final Inspection9/22/20069/28/20069/28/2006APASS
DetailsForrest France
Fire life safety passed field inspection.
BLD-Conference9/20/20069/26/20069/28/2006APART
DetailsJim Storey
final inspection for fire system and door holder closure, acoustical ceiling areas will be ready for inspection.; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes all ok pending firestopping lower level.
BLD-Conference9/26/20069/27/20069/28/2006APASS
DetailsJim Storey
COMPLETE THE FIRE ALARM TEST AND DOOR CLOSURE BETWEEN BLD. 24D & C. CALL GREG FOR DETAILS OF FIRE INSPECTORS ARRIVAL FOR THE AM OF THE 27TH.; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes smoke test for fire door assemblies in 3 hr wall septration ok/ opening protection per listing.
BLD-Conference9/21/20069/22/20069/22/2006PCANC
DetailsJim Storey
Door closure and hardware assembly inspection between building 24C & D. ; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes Inspection cancelled from web by: Greg Kirkes
BLD-Conference9/20/20069/20/20069/21/2006ACANC
DetailsJim Storey
inspect door closure between Fab4A and Fab4B. ; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes
BLD-Conference9/6/20069/11/20069/11/2006APASS
DetailsJim Storey
24C Subfab 3 hour fire wall approval to begin construction; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes reviewed fire stopping assembly and approved aplacation per listing for size of opening and penatrating idems.
BLD-Conference8/24/20068/28/20068/28/2006APASS
DetailsJim Storey
inspect 1 hour exit hallway at Fab level and discuss 3 hour fire wall at subfab level.; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes
BLD-Conference8/21/20068/22/20068/22/2006ANR
DetailsJim Storey
Inspect 1 hour wall for ceiling install in the lower Fab level east rooms.; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes need fire stopping.
BLD-Framing/Rough-in8/16/20068/16/20068/16/2006PPASS
DetailsJim Storey
joe; Phone #: ###-#### Internet Inspection Request from: Cathy Chiles3hr door instaltion ok
BLD-Conference7/31/20068/1/20068/1/2006APASS
DetailsJim Storey
Inspect fire door frame installation between B24C & D.; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes need to check spacing of door anchors per listing.
BLD-Conference6/19/20066/21/20066/21/2006APART
DetailsJim Storey
Look at fire rated door requirements and installation planning between B24C & D at the Fab level. Look at various notable items as the project progresses.; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes pending listing
Plan Reviewer's activity  6/15/2006 PASS
Reviewed and approved engineered four-hour penetration fire stops at the subfab fire wall. JCM
BLD-Conference6/9/20066/12/20066/12/2006APART
DetailsJim Storey
Door details for installation between building 24D and 24C at the Fab level for Mike Reyes; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes
BLD-Footing6/6/20066/9/20066/9/2006PPASS
DetailsJim Storey
Scheduled by a contractor via Hello! on 6/6/2006 at 12:28:14 PM. Contact: ###-####.
BLD-Footing6/6/20066/8/20066/8/2006APART
DetailsJim Storey
Scheduled by a contractor via Hello! on 6/6/2006 at 12:27:46 PM. Contact: ###-####.wip
BLD-Footing6/6/20066/7/20066/7/2006PPASS
DetailsJim Storey
Scheduled by a contractor via Hello! on 6/6/2006 at 12:27:18 PM. Contact: ###-####.
BLD-Footing5/31/20066/5/20066/5/2006PPART
DetailsJim Storey
Scheduled by a contractor via Hello! on 5/31/2006 at 3:33:09 PM. Contact: ###-####.wip si
BLD-Footing5/31/20066/2/20066/5/2006PDEFR
DetailsJim Storey
Scheduled by a contractor via Hello! on 5/31/2006 at 3:32:23 PM. Contact: ###-####. out of time.
BLD-Other5/26/20065/30/20065/30/2006APASS
DetailsJim Storey
Inspect steel, welding, and ceiling support structure. Look at other general conditions related to structure and concrete. ; Phone #: ###-#### Internet Inspection Request from: Greg Kirkes
Plan Reviewer's activity  5/24/2006 PASS
Plans approved. Need to review penetration assemblies at the four-hour fire wall on the next trip to Micron. JCM
PLANS/APPL TAKEN TO FRONT DESK  5/24/2006 DONE
Issue & PRINT to be Invoiced  5/24/2006 DONE
Plan assigned to (JCM)3/10/2006 5/24/2006 PASS
5/24/2006 07:43:24 JCM - activity updated through activity BLDA022 from case BLD06-00475.
Plan resubmittals received  5/23/2006 DONE
Received an e-mail identifying additional information requested on exit signs and penetration fire assemblies. JCM
Routing - FIRE4/3/2006 4/7/2006 PASS
Approved submet to following comments attached to plans:
1. Sheet A2.01 note 12 refers to a "future" gas cabinet. No information is provided about this cabinet or the gases. Gas cabinets shall meet all applicable requirements of IFC section 18 and other applicable code sections, including 1803.3.3.5, 2703.8.6 and 1803.13.2. A separate permit application will be required with plans showing compliance with applicable code requirements.
2. Portable Fire Extinguishers - none are shown on the Main level sheet A2.1.1. One 4-A:10-B:C extinguisher is required within 75' travel distance of all points of this floor. Locations shown on sheet A2.0.1, A2.2.1 and A2.2.2 appear to be acceptable. Final approval is subject to satisfactory field inspection.
3. Sheet PP0.1 lists chemicals in the Piping Abbreviations. No other Hazardous material information was submitted. It is understood there will be no new haz mat's to be used in the process and any increases in existing amounts will be monitored by Micron's Chemical Engineering staff to ensure maximum allowable quantities are not exceeded. Piping systems and equipment are to be in accordance with IFC 1803.2, 2703.2 and other applicable code sections.
Sprinkler and Fire Alarm plans not ready for review at this time.
Plan resubmittals requested  4/3/2006 DONE
E-mailed the architect with a copy of the plan review comment list requesting revisions. JCM
Routing - PLAN CHECK3/29/2006 4/3/2006  
Routing - FIRE3/10/2006 3/16/2006 PEND
Complex review; approval pending further review at next visit. AS and FA plans not ready for review. 3/23/06 - Buidling review not finished and no time for fire review at this visit; will review at next visit. AS and FA plans still not ready for review.
1st review completed  3/13/2006 PEND
project scope too large to complete on the first visit. JCM
Plan Reviewer's activity  3/10/2006 PEND
Because of the nature and size of the scope of work for this project, I was unable to complete the review on this visit. I will need additional time to review this project on my next Micron visit. JCM
Application received  2/28/2006 DONE
This permit was created on the web by Paul Marcolina
Third Notice BLD1/8/20071/8/2007   
Second Notice has not been responded to.
Plan assigned from Web2/28/20063/10/2006