Information based on query as of Thursday, July 18, 2024.
Permit Information
Permit NumberBLD06-00835
StatusFinaled
Name MICRON TECHNOLOGY INC
Site Address 8000 S FEDERAL WAY
Project Name 
Customer NumberC9377
ePlanReviewNo
Description
Micron Building #5 - Bench Shop Remodel - (C9377) - Relocate walls & add double doors in a 1,695 square foot area of the southwest corner of the first floor of Building #5 between grid lines 10&12 and B&D. This work will reconfigure the area to create new Bead Blast #112F, Dirty Shop #112D, Staging Room #112A and Hood Room #112C areas. This work also includes associated ceiling grid, mechanical and electrical modifications. This area is enclosed by one-hour fire-resistive fire barriers created a control area designated as 1-2. All construction per the approved plans. JCM .
Contact Information
See Activities list for contact information
Show Inspection Activities Only
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
Second Notice BLD9/25/20069/25/20061/8/2007 DONE
First Notice has not been responded to.
First Notice8/1/20068/1/20069/25/2006 DONE
DetailsJim Storey
BLD-Final7/27/20068/1/20068/1/2006APASS
DetailsJim Storey
Phone #: ###-#### Internet Inspection Request from: Rob Puckett
DOC - Permit Finaled8/1/20068/1/20068/1/2006PPASS
DetailsJim Storey
FIRE-Final Inspection7/18/20067/20/20067/20/2006APASS
DetailsForrest France
Noted items from previous confrence needing correction including door hardware at two double doors has been completed, inspection passed.
Plan resubmittals received  5/18/2006 PASS
5/17/06- Fire received email of Haz Mat Code Analysis from Bobbie Smith MTI, dated 5/16/06. Analysis accepted; project passed by Fire. Will sign off plans at next site visit.
6/14/2006 - Plans signed off at Micron site visit.
Plan assigned to (JCM)4/21/2006 5/17/2006 PASS
5/17/2006 13:41:17 JCM - activity updated through activity BLDA022 from case BLD06-00835.
Plan Reviewer's activity  5/17/2006 PASS
This permit is being issued prior to receiving the required chemical quantities to verify limits within control areas. The issue status is only to allow trades to pull necessary permits. Full approval after verification of chemical quantities. JCM
Routing - PLAN CHECK4/27/2006 5/17/2006 PASS
This permit is being issued prior to receiving the required chemical quantities to verify limits within control areas. The issue status is only to allow trades to pull necessary permits. Full approval after verification of chemical quantities. JCM
Issue & PRINT to be Invoiced  5/17/2006 DONE
Paul has Haz mat information he is sending to Sam. Ok to issue per Rita and John M.
PLANS/APPL TAKEN TO FRONT DESK  5/17/2006 DONE
Routing - FIRE4/21/2006 4/21/2006 FAIL
Not reviewed; need Haz Mat information to be provided.
Plan Reviewer's activity  4/21/2006 FAIL
Plan can be approved after confirmation of the chemical quantities within the control area. JCM
1st review completed  4/21/2006 FAIL
DetailsJohn Menard
Application received  3/30/2006 DONE
This permit was created on the web by Paul Marcolina
Third Notice BLD1/8/20071/8/2007   
Second Notice has not been responded to.
Plan assigned from Web3/30/20064/9/2006