Call ahead. Rooftop solar. Phone #: ###-#### Inspection requested via web by Beau Husfloen

Final fire life safety inspection complete

Rooftop solar on Library at Bown Crossing. I''ll need to call ahead to building maintenance for access (anytime should be fine, just need to let them know). I''ll also meet on site to show you around. Phone #: ###-#### Inspection requested via web by Beau Husfloen ele only part final needs to complet.

Review requested for Commercial Permit

1st rev comp, 7/10 L3 LIBRARY AT BOWN CROSSING Rooftop Solar PV

Comments attached to case.

Please provide and upload the following:
• Please provide a filled out Form #304 – Registered Design Professional found at our website at http://pds.cityofboise.org/home/documents/apps/300/ and uploaded in the small documents file
• Please provide all Drawing plans to scale on minimum 18” x 24” size sheets and uploaded into the “Drawings” file. Architectural stamped and signed by an Idaho licensed architect. Please see our ePlan submittal standards found at our website at http://pds.cityofboise.org/media/105041/electronicstandards.pdf
• Please provide all small documents (8 ½ x 11) uploaded into the “Documents” file
• Please provide a site specific fire flow at hydrants letter from Suez Water or other public water provider. Include static pressure if sprinklers are to be installed and uploaded in the small documents file
• Please provide Planning & Zoning letter(s) of approval and uploaded in the small documents file
• You have stated on the checklist a Building permit number for the vicinity map and the code analysis, as this is a new permit please provide a cover sheet with the vicinity map and code analysis required on a minimum 18 x 24” and upload into the Drawing file
• Site map provided is on an 8 ½ x 11 plan sheet Please provide the site map on a minimum 18 x 24” plan sheet (signed, stamped and dated by an Idaho licensed architect) and upload into the Drawing file
• Please provide the electrical plans on a minimum 18 x 24” plan sheets and upload into the Drawing file
• Please provide Electrical Plans to Show the location of inverters on site plan and manufactures specs which show it is a listed product
• Please provide Electrical plans to Show location of combiner junction box on site plan and manufactures specs which show it is a listed product
• Please provide Electrical plans to Show the clearances distances around all new and existing equipment on site plan.
• Please provide a one-line diagram on 18 x 24” sheet that includes the following Information and upload into the Drawing file:
o Conductor sizes.
o Conductor insulation types
o Conductor material (copper/aluminum).
o Conduit sizes.
o Conduit material (non-metallic, EMT, etc.).
o Over current device ratings.
o Existing and new panel amperage ratings
o Series and parallel configuration of the module connections.
o Wiring diagram including wire size and type showing the connection of the supply from the solar array to the point of connection
o Calculations demonstrating that the existing bus capacity and main disconnect will not be overloaded by the additional solar photovoltaic supply.
• Please provide manufacturer’s cut sheets, installation instructions and listing information for modules, racks, combiner boxes, DC disconnects, inverters and any other PV equipment associated and uploaded in the small documents file