| BLD-Final | 12/19/2019 | 12/20/2019 | 12/20/2019 | A | DONE |
 Brandon Shaw
|
|
|
Tony- swap of radios on tower Phone #: ###-####
|
| DOC - Permit Finaled | 12/20/2019 | 12/20/2019 | 12/20/2019 | P | PASS |
Brandon Shaw
|
|
|
|
| Issue PAID IN FULL permit | | | 3/5/2019 | | DONE |
|
|
|
|
| Telephone call | | | 2/27/2019 | | DONE |
|
|
|
emailed morelock@mrctowers.com the fees due
|
| 1st review completed | | | 2/11/2019 | | DONE |
Michael Hanson
|
|
|
|
| PLANS/APPL TAKEN TO FRONT DESK | | | 2/11/2019 | | DONE |
Michael Hanson
|
|
|
|
| Permit Ready to Issue | | | 2/11/2019 | | DONE |
|
|
|
all met-Need
met-GC
met-Rev cert of val
|
| Plan assigned to (M_H) | 2/6/2019 | | 2/11/2019 | | DONE |
Michael Hanson
|
|
|
02/18 #518 L2 ePlan. Verizon antenna
|
| Routing - PLAN CHECK | 2/6/2019 | | 2/11/2019 | | PASS |
Michael Hanson
|
|
|
|
| Routing - PLANNING | 2/6/2019 | | 2/6/2019 | | PASS |
Sue Cummings
|
|
|
|
| Intake Approval | | | 2/5/2019 | | PASS |
Javier Guzman
|
|
|
|
| Intake Approval | | | 1/15/2019 | | FAIL |
Joe Bruce
|
|
|
1. All drawings are required to be stamped by an Idaho licensed engineer. I noticed the original plans submitted had the engineers seal and signature. Please provide these on the most recent drawings that have been uploaded.
|
| Intake Approval | | | 1/11/2019 | | FAIL |
Joe Bruce
|
|
|
1. Review this document for required space for city approval stamps: https://pds.cityofboise.org/media/464072/pdox86_electronic_standards_full_050718.pdf
Plan sheets do not have the required space reserved for City approval stamps as specified in the Electronic Plans Submittal Standards. Revise sheets with a blank 4” x 2” (4"x4" on cover) space located 3” off the right sheet edge to allow for the title block. Verify ALL plan sheets have the required space for city approval stamp.
|
| Intake Approval | | | 1/3/2019 | | FAIL |
Joe Bruce
|
|
|
1. Review this document for required space for city approval stamps: https://pds.cityofboise.org/media/464072/pdox86_electronic_standards_full_050718.pdf
Plan sheets do not have the required space reserved for City approval stamps as specified in the Electronic Plans Submittal Standards. Revise sheets with a blank 4” x 2” (4"x4" on cover) space located 3” off the right sheet edge to allow for the title block. Verify ALL plan sheets have the required space for city approval stamp.
2. Sheets submitted are still 11x17 size, see checklist line item. - 11x17 plans do not meet the minimum sheet size. Plans are required to be drawn to scale on 18”x24” minimum size plan sheets. Upload drawings that meet these requirements.
3. Provide form #304 - Registered Design Professional signed by the owner. Upload this form in the documents folder.
4. Provide the planning and zoning letters of approval. Upload these documents in the documents folder.
5. Provide structural calculations for antenna attachment. Upload these documents into the documents folder.
|
| Intake Approval | | | 12/28/2018 | | FAIL |
Joe Bruce
|
|
|
1. Plan sheets do not have the required space reserved for City approval stamps as specified in the Electronic Plans Submittal Standards. Revise sheets with a blank 4” x 2” (4"x4" on cover) space located 3” off the right sheet edge to allow for the title block. Verify ALL plan sheets have the required space for city approval stamp.
2. Fill out and upload checklist form #518 into the documents folder. This form must accompany the submittal with all pages completed and filled out with page references. All items required by checklist must be uploaded. A complete prescreen review cannot be completed without the submission of a checklist.
3. 11x17 plans do not meet the minimum sheet size. Plans are required to be drawn to scale on 18”x24” minimum size plan sheets. Upload drawings that meet these requirements.
|
| Application received | | | 12/21/2018 | | DONE |
|
|
|
Application submitted via PDS Online on Dec 21 2018 11:45AM
|