Information based on query as of Wednesday, July 24, 2024.
Permit Information
Permit NumberBLD19-04533
StatusIssued
Name MICRON TECHNOLOGY INC
Site Address 8000 S FEDERAL WAY
Project NameMicron - B24E
Customer Number 
ePlanReviewYes
Description
)MICRON-C39415, B24E) Permit for the construction of an Isolation Wall Rm 171A between grid lines 32 and 35 and C2 and D6. The existing corridoe wall at grid line C-2 is to be maintainded with a new 45 minute double door being installed. There is no change in occupancy or use and a certificate of completion will be issued upon final approveal and completion of this project. This building is fully fire sprinklered. Any alterations to the sprinkler system willl require a separate pemit and shall comply with NFPA 13 as regulated by the fire department. CDM
Contact Information
See Activities list for contact information
Show Inspection Activities Only
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
FIRE-Final Inspection7/22/20207/23/20207/23/2020APASS
DetailsTroy Cobbley
Life safety passed.

call 15 minutes prior. Phone #: ###-#### Inspection requested via web by Daniel Cook
Fees Due Hold5/8/2020 5/27/2020 DONE
DetailsChristina Prado
BLD-Framing/Rough-in5/7/20205/8/20205/8/2020APASS
DetailsJim Storey
screened // Dan Phone #: ###-####
Issue & PRINT to be Invoiced  3/3/2020 DONE
Plan assigned to (CDM)2/5/20202/5/20202/27/2020 PASS
DetailsCarl D Madsen
Micron L-2
Routing - PLAN CHECK2/27/2020 2/27/2020 PASS
DetailsCarl D Madsen
PLANS/APPL TAKEN TO FRONT DESK  2/27/2020 DONE
Permit Ready to Issue  2/27/2020 DONE
ALL MET

NEED
GC FORM
REVISED VALUE
Route to Impact Fee Review2/18/20202/21/20202/19/2020 PASS
DetailsTravis P Black
Review requested for Commercial Permit
Routing - FIRE2/5/20202/5/20202/18/2020 PASS
DetailsGreg Ruxton
COMMENTS ATTACHED TO CASE
1st review completed  2/18/2020 DONE
Routing - PLAN CHECK2/13/2020 2/13/2020 FAIL
DetailsCarl D Madsen
Intake Approval  1/31/2020 PASS
Application received  11/14/2019 DONE
Application submitted via PDS Online on Nov 14 2019 3:24PM