Information based on query as of Tuesday, July 16, 2024.
Permit Information
Permit NumberBLD20-00419
StatusIssued
Name SHRADER & MARTINEZ CONSTRUCTION
Site Address 6752 S BUSINESS WAY
Project NameDID2 Site Alterations
Customer Number 
ePlanReviewYes
Description
(DID2) Permit for the construction of (2)new exterior canopies, a new covered entry and site lighting. The total new covered area is 32,214 sq. ft.
Refer to DRH19-00468 for zoning approval
Refer to GRD19-00110 for separate site engineering application by others. This building is considered and unlimited area building and is required to have a minimum of 60' open yards on all sides of the building. The building is fully fire sprinklered for unlimited area. Any alterations to the sprinkler system wil require a separate permit and shall comply with NFPA 13 as regulated by the fire department. CDM
Contact Information
See Activities list for contact information
Show Inspection Activities Only
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
BLD-Other8/11/20208/11/20208/11/2020APASS
DetailsJim Storey
North Canopy inspection, review of east side excavation footings

AM or PM is OK Phone #: ###-#### Inspection requested via web by Mark Coiner
BLD-Other7/23/20207/24/20207/24/2020APASS
DetailsBrandon Shaw
Framing, OK to install roof...
BLD-Other7/14/20207/15/20207/15/2020APASS
DetailsJim Storey
Storefront entry inspection, new entry awning installation inspection
AM or PM is fine
Mark Coiner Phone #: ###-#### Inspection requested via web by Mark Coiner strucral ok
BLD-Footing6/22/20206/24/20206/24/2020PPASS
DetailsJim Storey
North side of existing building SOG for canopy install footing and slab steel inspection Phone #: ###-#### Inspection requested via web by Mark Coiner
BLD-Foundation6/22/20206/23/20206/23/2020PPASS
DetailsJim Storey
footing steel and SOG steel inspection Phone #: ###-#### Inspection requested via web by Mark Coiner
Issue PAID IN FULL permit  6/5/2020 DONE
Print Occupancy Form  6/5/2020 DONE
Telephone call  5/29/2020 DONE
Emailed applicant and inform them we still need a 302, 306 and something from ACHD prior to the issuance of this project.
Plan assigned to (CDM)2/21/20202/21/20205/28/2020 PASS
DetailsCarl D Madsen
DID2 Canopies L-3
PLANS/APPL TAKEN TO FRONT DESK  5/28/2020 DONE
Permit Ready to Issue  5/28/2020 DONE
met
NEED: ACHD

(tbenson@shradermartinez.com and mcoiner@shradermartinez.com)

All Met
GC FORM
REVISED VALUE
Routing Off Site - STRUCTURAL5/8/2020 5/26/2020 FAIL
DetailsCarl D Madsen
Routing Off Site - STRUCTURAL5/19/2020 5/26/2020 PASS
DetailsCarl D Madsen
Routing Off Site - STRUCTURAL4/17/2020 4/30/2020 FAIL
DetailsCarl D Madsen
Routing - FIRE4/3/20204/3/20204/26/2020 PASS
DetailsGreg Ruxton
Comments attached to case.
Routing Off Site - STRUCTURAL4/3/2020 4/10/2020 FAIL
DetailsCarl D Madsen
Routing - PLAN CHECK4/3/2020 4/10/2020 PASS
DetailsCarl D Madsen
Routing - PLUMBING4/3/2020 4/6/2020 PASS
DetailsDan Ediger
per plans and ISPC
Route to Impact Fee Review3/17/20203/20/20203/19/2020 PASS
DetailsTravis P Black
Review requested for Commercial Permit
Routing - FIRE2/21/20202/21/20203/17/2020 FAIL
DetailsGreg Ruxton
Attached comments to case and emailed applicant.
1st review completed  3/17/2020 FAIL
DetailsCarl D Madsen
Routing Off Site - STRUCTURAL2/21/2020 3/12/2020 FAIL
DetailsCarl D Madsen
Stapley
Routing - PLAN CHECK2/21/2020 3/12/2020 FAIL
DetailsCarl D Madsen
Routing - Design Review2/21/2020 2/26/2020 PASS
DetailsJosh Wilson
Routing - Erosion and Sediment2/21/2020 2/25/2020 PASS
DetailsMichael Zawacki
No esc needed
Routing - PLANNING2/21/2020 2/24/2020 PASS
DetailsEthan Mansfield
Routing - Addressing2/21/2020 2/24/2020 PASS
DetailsDoug Chausow
Routing - MECHANICAL2/21/2020 2/24/2020 PASS
DetailsTroy James
Routing - PLUMBING2/21/2020 2/21/2020 FAIL
DetailsDan Ediger
Missing pages and water isometric drawing
Intake Approval  2/20/2020 PASS
Intake Approval  2/11/2020 FAIL
DetailsJulie Romig
John,
To complete your application, please provide the following:
1. Signature on structural calcs (Design calcs from A&A Engineering are stamped but not signed);
2. Leave a 4"x2" blank space in the lower right hand corner, located 3" off the right sheet edge, on every drawing per ePlanReview submittal standards;
3. Provide Lighting COMcheck for new lighting.
Thank you,
Julie Romig
2/11/2020
Application received  2/10/2020 DONE
Application submitted via PDS Online on Feb 10 2020 3:54PM