when calling id power please specify space # 4 Phone #: ###-#### Inspection requested via web by Dan Rohl Space #4 p/s o/h rec ok

SPACE # 4 Phone #: ###-#### Inspection requested via web by Dan Rohl

4.05.32 Code violations not to be retained
250.53(a)(2) Supplemental electrode (ground rod) required 2 per service
314.23(A) Enclosures shall be rigidly and securly fastened in place
250.94(B)
Method of Bonding at the Service. Bonding jumpers
meeting the requirements of this article shall be used around
impaired connections, such as reducing washers or oversized,
concentric, or eccentric knockouts. Standard locknuts or bushings
shall not be the only means for the bonding required by
this section but shall be permitted to be installed to make a
mechanical connection of the raceway(s).
Electrical continuity at service equipment, service raceways,
and service conductor enclosures shall be ensured by
one of the following methods:
(1) Bonding equipment to the grounded service conductor
in a manner provided in 250.8
(2) Connections utilizing threaded couplings or threaded
hubs on enclosures if made up wrenchtight
(3) Threadless couplings and connectors if made up tight
for metal raceways and metal-clad cables
(4) Other listed devices, such as bonding-type locknuts,
bushings, or bushings with bonding jumpers
230.70 Marking. Each service disconnect shall be permanently
marked as to its purpose

This permit was created on the web by Dan Rohl