First Notice | 4/8/2015 | 4/8/2015 | 7/16/2015 | | DONE |
Rex Boyles
|
|
|
This permit finaled on the web by Paula Gratiot
|
Final | 4/7/2015 | 4/8/2015 | 4/8/2015 | A | PASS |
Rex Boyles
|
|
|
Builder has been reminded to have the doors unlocked for this final. Builder is at 861.4497 Zac if needed. Phone #: ###-#### Inspection requested via web by Paula Gratiot final ok
|
Final | 4/3/2015 | 4/6/2015 | 4/6/2015 | A | NH |
Rex Boyles
|
|
|
Building will be unlocked. Thanks. Phone #: ###-#### Inspection requested via web by Paula Gratiot no access
|
Electrical Rough-In | 2/24/2015 | 2/25/2015 | 2/25/2015 | A | PASS |
Rex Boyles
|
|
|
Phone #: ###-#### Inspection requested via web by Paula Gratiot r/i ok corrections made
|
Electrical Rough-In | 2/19/2015 | 2/23/2015 | 2/23/2015 | A | FAIL |
Cevyn Recla
|
|
|
Suite 208 known as TMN Events. General Contractor is Owyhee Enterprises. Phone #: ###-#### Inspection requested via web by Paula Gratiot left message. 300.4(A) Cables and Raceways Through Wood Members. (1) Bored Holes. In both exposed and concealed locations, where a cable- or raceway-type wiring method is installed through bored holes in joists, rafters, or wood members, holes shall be bored so that the edge of the hole is not less than 32 mm (11/4 in.) from the nearest edge of the wood member. Where this distance cannot be maintained, the cable or raceway shall be protected from penetration by screws or nails by a steel plate(s) or bushing(s), at least 1.6 mm (1/16 in.) thick, and of appropriate length and width installed to cover the area of the wiring.
|
Issue PAID IN FULL permit | | | 2/19/2015 | | DONE |
|
|
|
Payment received via Govolutions
|
Application received | | | 2/15/2015 | | DONE |
|
|
|
This permit was created on the web by Paula Gratiot
|