Information based on query as of Wednesday, July 17, 2024.
Permit Information
Permit NumberFIR04-00576
StatusFinaled
Name MICRON TECHNOLOGY INC FA
Site Address 8000 S FEDERAL WAY
Project Namealm - BLDG 01X
Customer Number6400
ePlanReview 
Description
To provide a flow switch and a tamper switch on the duct quench line of the sprinkler system for monitoring with the existing fire alarm system. The required manual fire alarm system includes sprinkler monitoring, HVAC shutdown, elevator recall/shutdown, fire/smoke damper control, door release and notification throughout.

The associated building permit (BLD 04-01022) is to install an 8" diameter fume exhaust duct from Drum Unload Room #107D to an existing 14" diameter fume exhaust duct above Corridor #100J. This new 8' duct will be continuously wrapped with a two-hour fire-resistive rated #M Firemaster duct wrap. The duct will be protected with a fire sprinkler quench system at the penetration of the two-hour fire barrier wall. This quench system is an approved alternate to the required shaft enclosure approved by the Building & Fire Department (see copy of attached alternate approval). All construction per the approved plans. #04-304/JCM - Micron Building #1X - Install (SOD) Bulk Chemical Feed System *

The associated sprinkler permit (FIR04-00513) is to install fire sprinkler protection (2 heads) on each side of a two-hour fire barrier (here known to be the ceiling). This work is related to the installation of the 8" diameter, continuously wrapped, with 3M "Firemaster" for a two-hour fire-resistive rated duct wrap fume exhaust duct, from Drum Unload Room #107D to an existing 14" diameter fume exhaust duct above Corridor #100J. This quench system is on record as an approved alternate to the required shaft enclosure approved by Dave Miller. This fire protection work shall comply with the IFC 2000 and the permit review comments; each regulated by the Fire Chief. The review comments, permit and fire "Inspection Card" are required to be on site as a condition of this work, to provide witness of compliance verification of minimum code. This permit is attached to BLD04-01022. Micron Building #1X - Install (SOD) Bulk Chemical Feed System *
Contact Information
See Activities list for contact information
Show Inspection Activities Only
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
INSP-Alarm Testing11/30/200412/1/200412/1/2004PPASS
DetailsRick Jackson
Cell Ph. ###-####; Phone #: ###-#### Internet Inspection Request from: Daniel Buccino Exsisting flow switch was used so the addresses were changed 12/1/2004 2:35:05 PM
DOC - Permit Finaled12/1/200412/1/200412/1/2004PPASS
DetailsRick Jackson
Finaled by inspector at 12/1/2004 2:32:55 PM
Case Summary  11/9/2004 DONE
Issue and Print Permit  9/30/2004 DONE
PLANS/APPL TAKEN TO FRONT DESK  9/29/2004 DONE
Inspection Record Card- Fire9/29/2004 9/29/2004 DONE
Permit Ready to Issue  9/29/2004 DONE
Plan assigned to (Mary)9/17/2004 9/29/2004 DONE
Alarm Plan Check  9/29/2004 PASS
Approved pending field inspection of fire alarm permit comments.
Plan resubmittals received  9/28/2004 DONE
Received cutsheets via fax from Justin Wood.
Telephone call  9/23/2004 DONE
Request for cut sheets for tri module and the water supervision tamper switch
PLANS/APPL TAKEN TO FRONT DESK  9/23/2004 DONE
Application received  9/17/2004