Information based on query as of Wednesday, July 17, 2024.
Permit Information
Permit NumberFIR05-00164
StatusFinaled
Name FIREXPERT
Site Address 5200 W BETHEL ST
Project NameBoise River Fence
Customer Number 
ePlanReview 
Description
This Fire permit covers the newly installed powder coating spray booth and the booth dry chemical fire extinguishing system.
Contact Information
See Activities list for contact information
Show Inspection Activities Only
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
INSP-Final Inspection5/13/20055/16/20055/16/2005APASS
DetailsTroy Cobbley
Suppression system operated correctly
Issue permit  5/13/2005  
Plan assigned to (SAM)5/12/2005 5/12/2005 PASS
resubmittals acceptable subject to annotations and conditions specified in plan review comments. Discussed with JR Rogers of NW Finishing Equipment and Mike Lincoln, Boise River Fence and faxed to architect.
PLANS/APPL TAKEN TO FRONT DESK  5/12/2005  
Inspection Record Card- Fire5/12/2005 5/12/2005 DONE
Permit Ready to Issue  5/12/2005 DONE
Telephone call  5/12/2005 DONE
tlk to don kartchner ###-#### that permit and fees are ready to be picked up
Plan resubmittals received  4/28/2005 DONE
Received 2 Copys of sheets A0.1, A1.1 2 Copys of Finishing Equipment NW, 2 FacsimileTransmittal letters, 2 Power Collection Booth, & 1 Letter. Taken to Sam R.
Sprinkler Plan Check4/6/2005 4/19/2005 FAIL
Review postponed pending further information from electrical and mechanical inspections and the need for a building permit due to discovered structural modifications and lack of CO.
Plan review failed. Review comments faxed to Boise River Fence and FirExpert. I called to advise them to call me to discuss any questions after they have reviewed the comments.
Plan resubmittals received  4/7/2005 DONE
Received 2 Finishing equipment,2 Spray booth,& 2 Powder coating operations. Taken to Sam R.
Meeting  4/6/2005 DONE
Meeting with Nathaniel, of Boise River Fence and JR Rogers of Finishing Equipment NW at their request to clarify and explain additional resubmitted information regarding the layout and design of the powder coating spray booth and bake oven. Material accepted for review.
Meeting  3/29/2005 DONE
Meeting with Mark and Nathaniel to discuss additional plans & details of dry powder booth they brought in. Reviewed IFC requirements in detail. They need resubmit a floor plan and additional information relevant to the IFC requirements for powder coating prior to our approval of this extinguishing system permit. they also need to pull a Mech permit notably due to ventilation requirements for the booth, and be sure to "attach" the FIR, MECH, and ELE permits together. Per Marlene, there is no need for a building permit for this since it is a piece of equipment with no structural requirements.
Telephone call  3/24/2005 DONE
telcon from Nathaniel at Boise River Fence. Discussed need for additional information on dry powder booth necessary for review of the FP system and approval of the operation per IFC 15. They requested a meeting to bring in more material to discuss. Set up for 3/29/05, 10:30 am.
Application received  3/23/2005  
Plan assigned to (SAM)3/23/2005