overhead Work Scope: Over Head Only / Note This System Pressure Exceeds 100 psi.
Modify the existing wet pipe sprinkler system on the 9th floor of this existing twelve story bldg. by adding and relocating heads to accommodate a new wall and ceiling layout. New Flex Head assemblies will be added as necessary where required. A mechanical tee may be added were necessary to supply a new head location. The fire sprinkler system work shall comply with the IFC 2003, the attached review comments/conditions, as regulated by the Fire Chief. The review comments/conditions, permit and fire "Inspection Card" are required to be on site as a condition of this work, to provide witness of compliance verification of minimum code. This permit is attached to BLD07-03157. When tenant work affects fire sprinkler protection outside the permitted work area due to the installation of tenant-demising or new partition walls, the affected area sprinkler coverage outside the BLD permit will fall under the Fire Permit scope of work, to maintain the required fire protection within the fire sprinklered facility. The “Riser” and its supplies which include all appurtenances (including tamper, alarm and alarm monitoring) relating to the normal and correct function and integrity of this system will fall under the jurisdiction for code compliant verification.