This fire alarm permit is to provide a sprinkler monitoring system to include a pull station, monitor module for the sprinkler tampers and flows, as well as a monitor module for the paint booth tamper switch. An AES panel is being used for the means of signal transmission. Notification is not part of this permit scope.
NOTE TO INSPECTOR: HVAC shutdown has not been indicated on the plans. If duct and/or induct detectors are provided, a resubmittal shall be required.

Associated building permit: BLD10-00228 (KENNY'S ROD SHOP) Interior and exterior remodel to an existing 7,500 sq. ft. building for a new auto body shop tenant per approved plans. Work to include: perform select interior demolition; remove select existing doors, door frames, and walls; install new steel I-beams and posts; frame in existing wall openings; replace specific existing overhead doors with new; remove portions of the existing ceiling structure and framing as designated on plans; remove the existing exterior steel siding and replace with new panel system; and install a pre-manufactured "Spray Net - Side Draft Spray Paint Booth". All work per the approved plans, Engineering, attached plan review report, and all other reviewing agencies approvals. NOTE: This building is fully fire sprinklered for one-hour substitution. Any modifications or alterations to the existing sprinkler system WILL require a separate permit. CZC10-00001 per Planning and Zoning. **SRZ**