| Final | 4/11/2018 | 4/12/2018 | 4/12/2018 | A | PASS |
 Ben Livingston
|
|
|
Check supports of dryer vent Phone #: ###-#### Inspection requested via web by Dan McFate
|
| Final | 4/10/2018 | 4/11/2018 | 4/11/2018 | A | FAIL |
Ben Livingston
|
|
|
Please call when you are on the way so we can make sure someone is there Phone #: ###-#### Inspection requested via web by Dan McFate
dryer vent needs to be supported every 4'
|
| Rough-in | 2/26/2018 | 2/26/2018 | 2/26/2018 | P | PASS |
Bill VanDegrift
|
|
|
Please call before you go so we can meet you there Phone #: ###-#### Inspection requested via web by Dan McFate ri ok
|
| Rough-in | 2/23/2018 | 2/23/2018 | 2/23/2018 | P | PART |
Ben Livingston
|
|
|
not sure if you need to re look at this,, Tony 415
dryer vent needs wall furred out with nail plates, then okay Tony
|
| Rough-in | 2/22/2018 | 2/22/2018 | 2/22/2018 | P | PART |
Ben Livingston
|
|
|
Please give us the first available afternoon inspection if possible. Contractor has insulation scheduled at 2 and we need inspection done before they can proceed. Please call ###-#### when you are on the way so we can meet you there. Thank you! Phone #: ###-#### Inspection requested via web by Dan McFate
dryer vents need to be 4 " diameter, wall needs furred out
|
| Issue PAID IN FULL permit | | | 2/22/2018 | | DONE |
|
|
|
Payment received via Govolutions
|
| Application received | | | 2/13/2018 | | DONE |
|
|
|
This permit was created on the web by Dan McFate
|