| Final | 8/21/2018 | 8/22/2018 | 8/22/2018 | P | PASS |
 Ben Livingston
|
|
|
Garage code #1957 Phone #: ###-#### Inspection requested via web by Debbie Marino
|
| Rough-in | 7/2/2018 | 7/3/2018 | 7/3/2018 | A | PASS |
Ben Livingston
|
|
|
Phone #: ###-#### Inspection requested via web by Debbie Marino
|
| Rough-in | 6/28/2018 | 6/28/2018 | 6/28/2018 | P | FAIL |
Brian Scoles
|
|
|
Phone #: ###-#### Inspection requested via web by Debbie Marino- duct tape is not acceptable end cap- need to remove outside air tap from R/A register and seal or install metal round end cap and seal where flex was removed from and rerouted
|
| Rough-in | 6/26/2018 | 6/27/2018 | 6/27/2018 | A | PART |
Ben Livingston
|
|
|
Phone #: ###-#### Inspection requested via web by Debbie Marino
fresh air duct needs straps every 6'
|
| Rough-in | 6/25/2018 | 6/26/2018 | 6/26/2018 | A | FAIL |
Ben Livingston
|
|
|
Phone #: ###-#### Inspection requested via web by Debbie Marino
Bvent needs insulation shield, all exhaust fans need to be tied in, 6" fresh air back to return plenum not return can, all floor boots need to be sealed to the floor
|
| Pressure Test | 6/25/2018 | 6/26/2018 | 6/26/2018 | A | PASS |
Ben Livingston
|
|
|
Phone #: ###-#### Inspection requested via web by Debbie Marino
20 lb gas
|
| Issue PAID IN FULL permit | | | 6/8/2018 | | DONE |
|
|
|
Payment received via Govolutions
|
| Application received | | | 6/8/2018 | | DONE |
|
|
|
This permit was created on the web by Debbie Marino
|