Information based on query as of Tuesday, July 16, 2024.
Permit Information
Permit NumberMEC19-03512
StatusFinaled
Name SNOWFLAKE AIR LLC
Site Address 4701 W JEWELL ST
Project Name 
Customer Number3853
ePlanReviewNo
Description
Addition: Replace furnace and AC. New ductwork. Exhaust for bath, kitchen hood
Contact Information
See Activities list for contact information
Show Inspection Activities Only
DescriptionReceivedRequestedCompletedAM/PMDispositionAssigned To 
Final12/3/201912/4/201912/4/2019APASS
DetailsChad Schwendiman
Locking caps have been installed on condenser Phone #: ###-#### Inspection requested via web by Michael Stimpson
Final12/2/201912/3/201912/3/2019AFAIL
DetailsChad Schwendiman
Door code 1370 Phone #: ###-#### Inspection requested via web by Michael Stimpson - Need locking access caps on refrigeration piping
Rough-in10/5/201910/7/201910/7/2019APASS
DetailsJack Reynolds
Stamped Man J will be on site Phone #: ###-#### Inspection requested via web by Michael Stimpson
- 5lb and 20lb pressure tests ok
- R/I ok
- check equipment to man J at final
- transfer air for bedrooms at final
Rough-in10/3/201910/4/201910/4/2019PFAIL
DetailsJack Reynolds
Transfer grilles will be installed after drywall is complete. Butterfly damper installed in-line with fresh air intake to furnace Phone #: ###-#### Inspection requested via web by Michael Stimpson
- need stamped man J onsite
all other corrections ok
Telephone call  10/3/2019 DONE
per michael with snowflake air add 2nd dryer vent and remove one bath fan
Pressure Test9/30/20199/30/20199/30/2019PPASS
DetailsJack Reynolds
-20lb gas pressure test ok
Rough-in9/27/20199/30/20199/30/2019PFAIL
DetailsJack Reynolds
Phone #: ###-#### Inspection requested via web by Michael Stimpson
-outside air cant terminate at the asphalt roof and is within 10' of exhausts
- need to see transfer/return into each bedroom
- range hood venting needs sealed
- return ducting needs sealed
- 5lb flue pressure test under 5lb
- install inert tape at gasline penetration
- add another dryer exhaust to permit
Issue PAID IN FULL permit  8/8/2019 DONE
Payment received via Govolutions
Application received  8/8/2019 DONE
This permit was created on the web by Michael Stimpson