MICRON (MIC 20003141) BUILDING 24D AND 24E * SHELL PACKAGE FOR FAB(B24D) AND LAB(B24E) TO BUILD A TWO STORY WITH BASEMENT AND SUBFAB SHELL BUILDING CONSTRUCTED OF CONCRETE FOUNDATION AND FLOORS WITH A STEEL STRUCTURAL FRAME AND METAL ROOF DECK AND METAL STUD EXTERIOR WALL CONSTRUCTION. THIS BUILDING IS AN ADDITION TO THE SOUTH SIDE OF EXISTING BUILDING #24. BUILDING #24D IS SEPARATED FROM BUILDING #24 AND BUILDING #24E BY FOUR-HOUR AREA SEPARATION WALLS. BUILDING #24D CONSISTS OF A 36,635 SQ. FT. BASEMENT, A 50,350 SQ. FT. SUBFABRICATION AREA, A 52,000 SQ. FT. FIRST STORY FABRICATION AREA AND A 47,000 SQ. FT. SECOND STORY UNOCCUPPIED FAN DECK. THIS BUILDING ALSO CONTAINS AN INTERSTITIAL CATWALK LEVEL BETWEEN THE FAB AND FAN DECK LEVELS. BUILDING #24E CONSISTS OF A 19,200 SQ. FT. BASEMENT LEVEL AND A 24,100 SQ. FT. FIRST FLOOR LEVEL. THESE BUILDINGS ARE FULLY FIRE SPRINKLED. THE SPRINKLERS ARE BEING USED FOR AREA INCREASE. THIS IS A SHELL PERMIT ONLY. NO OCCUPANCY IS ALLOWED UNDER THIS PERMIT. A SEPARATE TENANT IMPROVEMENT PERMIT WILL BE REQUIRED TO FINISH THIS BUILDING FOR OCCUPANCY. BUILDING #24D IS ALLOWED TO BE OVER THE ALLOWABLE AREA PRESCRIBED BY THE 1997 UBC BY WAY OFAN ALTERNATE REPORT PREPARED BY SCHIRMER ENGINEERING, DATED JULY 5, 2000 AND APPROVED BY TIMOTHY HOGLAND IN AN APPROVAL LETTER DATED AUGUST 7, 2000. ALL CONSTRUCTION PER THE APPROVED PLANS AND ATTACHED COMMENT LIST. DRH00-00072 /PC#557-00/JCM